TESPy: Modelado de sistemas termicos basicos, Bomba de calor.

 

 

Fig1. Topología típica de una bomba de calor 

Este tutorial es la continuación del tutorial de la introducción . Primero, revisaremos las opciones de especificación y la flexibilidad de modelado en TESPy, así como algunos errores típicos que pueden ocurrir al usar el software. A continuación, realizaremos un análisis simple del COP de la bomba de calor basado en varios parámetros de entrada.

Descargue el guión completo aquí:heat_pump.py

Flexibilidad en el modelado

En TESPy las especificaciones de componentes y/o conexiones son intercambiables en todas las formas posibles, siempre que el sistema de ecuaciones que representa la planta esté bien definido.

Por ejemplo, en lugar del calor proporcionado por el condensador, podríamos especificar el caudal másico m del refrigerante. Para anular la configuración de un parámetro, debe establecerse en None. Para sustituir la especificación, establezca el caudal másico de la conexión c1 en 5 kg/s:

>># en los parametros iniciales habiamos indicado el Q en el condensador como

>># co.set_attr(pr=0.98, Q=-1e6))

>># ahora vamos a eliminar ese calor

>>co.set_attr(Q=None)

>>c1.set_attr(m=5)

>>my_plant_one.solve('design')

>>my_plant_one.print_results()

 >>>

DEBUG:TESPyLogger:Solver properties:
 - mode: design
 - init_path: None
 - design_path: None
 - min_iter: 4
 - max_iter: 50
DEBUG:TESPyLogger:Network information:
 - Number of components: 5
 - Number of connections: 5
 - Number of busses: 0
DEBUG:TESPyLogger:Removing 4 mass flow variables from system variables.
DEBUG:TESPyLogger:Updated fluid property SI values and fluid mass fraction for user specified connection parameters.
DEBUG:TESPyLogger:The component compressor has 0 variables.
DEBUG:TESPyLogger:The component condenser has 0 variables.
DEBUG:TESPyLogger:The component cycle closer has 0 variables.
DEBUG:TESPyLogger:The component evaporator has 0 variables.
DEBUG:TESPyLogger:The component expansion valve has 0 variables.
DEBUG:TESPyLogger:Generic fluid property specification complete.
INFO:TESPyLogger:Network initialised.
INFO:TESPyLogger:Starting solver.
DEBUG:TESPyLogger:Number of connection equations: 0.
DEBUG:TESPyLogger:Number of bus equations: 0.
DEBUG:TESPyLogger:Number of component equations: 6.
DEBUG:TESPyLogger:Number of user defined equations: 0.
DEBUG:TESPyLogger:Total number of variables: 6.
DEBUG:TESPyLogger:Number of component variables: 0.
DEBUG:TESPyLogger:Number of connection variables: 6.
PROGRESS:TESPyLogger: iter  | residual   | progress   | massflow   | pressure   | enthalpy   | fluid      | component  
PROGRESS:TESPyLogger:-------+------------+------------+------------+------------+------------+------------+------------
PROGRESS:TESPyLogger: 1     | 2.44e-08   | 100 %      | 0.00e+00   | 3.39e-08   | 3.68e-10   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 2     | 4.68e-10   | 100 %      | 0.00e+00   | 4.75e-10   | 5.60e-11   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 3     | 0.00e+00   | 100 %      | 0.00e+00   | 0.00e+00   | 0.00e+00   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 4     | 0.00e+00   | 100 %      | 0.00e+00   | 0.00e+00   | 0.00e+00   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger:-------+------------+------------+------------+------------+------------+------------+------------
DEBUG:TESPyLogger:Total iterations: 4, Calculation time: 0.03 s, Iterations per second: 123.32
INFO:TESPyLogger:Postprocessing complete.
INFO:TESPyLogger:Calculation complete.
RESULT:TESPyLogger:
##### RESULTS (Compressor) #####
+------------+----------+----------+-----------+----------+--------+
|            |        P |       pr |        dp |    eta_s |   igva |
|------------+----------+----------+-----------+----------+--------|
| compressor | 1.84e+05 | 4.70e+00 | -2.12e+01 | 8.50e-01 |    nan |
+------------+----------+----------+-----------+----------+--------+
##### RESULTS (SimpleHeatExchanger) #####
+------------+-----------+----------+----------+----------+-----+-----+------+---------+------+--------+
|            |         Q |       pr |       dp |     zeta |   D |   L |   ks |   ks_HW |   kA |   Tamb |
|------------+-----------+----------+----------+----------+-----+-----+------+---------+------+--------|
| condenser  | -6.20e+05 | 9.80e-01 | 5.37e-01 | 6.34e+05 | nan | nan |  nan |     nan |  nan |    nan |
| evaporator |  4.37e+05 | 9.80e-01 | 1.17e-01 | 2.11e+04 | nan | nan |  nan |     nan |  nan |    nan |
+------------+-----------+----------+----------+----------+-----+-----+------+---------+------+--------+
##### RESULTS (CycleCloser) #####
+--------------+------------------+-------------------+
|              |   mass_deviation |   fluid_deviation |
|--------------+------------------+-------------------|
| cycle closer |         0.00e+00 |          0.00e+00 |
+--------------+------------------+-------------------+
##### RESULTS (Valve) #####
+-----------------+----------+----------+----------+
|                 |       pr |       dp |     zeta |
|-----------------+----------+----------+----------|
| expansion valve | 2.22e-01 | 2.05e+01 | 1.03e+07 |
+-----------------+----------+----------+----------+
##### RESULTS (Connection) #####
+----+-----------+-----------+-----------+-----------+-----------+---------+
|    |         m |         p |         h |         T |         x | phase   |
|----+-----------+-----------+-----------+-----------+-----------+---------|
|  0 | 5.000e+00 | 5.834e+00 | 3.224e+02 | 2.066e+01 | 5.173e-01 | tp      |
|  1 | 5.000e+00 | 5.834e+00 | 3.224e+02 | 2.066e+01 | 5.173e-01 | tp      |
|  2 | 5.000e+00 | 5.717e+00 | 4.097e+02 | 2.000e+01 | 1.000e+00 | tp      |
|  3 | 5.000e+00 | 2.687e+01 | 4.465e+02 | 9.117e+01 | 1.000e+00 | g       |
|  4 | 5.000e+00 | 2.633e+01 | 3.224e+02 | 8.000e+01 | 0.000e+00 | tp      |
+----+-----------+-----------+-----------+-----------+-----------+---------+

 iter  | residual   | progress   | massflow   | pressure   | enthalpy   | fluid      | component  
-------+------------+------------+------------+------------+------------+------------+------------
 1     | 2.44e-08   | 100 %      | 0.00e+00   | 3.39e-08   | 3.68e-10   | 0.00e+00   | 0.00e+00   
 2     | 4.68e-10   | 100 %      | 0.00e+00   | 4.75e-10   | 5.60e-11   | 0.00e+00   | 0.00e+00   
 3     | 0.00e+00   | 100 %      | 0.00e+00   | 0.00e+00   | 0.00e+00   | 0.00e+00   | 0.00e+00   
 4     | 0.00e+00   | 100 %      | 0.00e+00   | 0.00e+00   | 0.00e+00   | 0.00e+00   | 0.00e+00   
Total iterations: 4, Calculation time: 0.03 s, Iterations per second: 123.32

##### RESULTS (Compressor) #####
+------------+----------+----------+-----------+----------+--------+
|            |        P |       pr |        dp |    eta_s |   igva |
|------------+----------+----------+-----------+----------+--------|
| compressor | 1.84e+05 | 4.70e+00 | -2.12e+01 | 8.50e-01 |    nan |
+------------+----------+----------+-----------+----------+--------+
##### RESULTS (SimpleHeatExchanger) #####
+------------+-----------+----------+----------+----------+-----+-----+------+---------+------+--------+
|            |         Q |       pr |       dp |     zeta |   D |   L |   ks |   ks_HW |   kA |   Tamb |
|------------+-----------+----------+----------+----------+-----+-----+------+---------+------+--------|
| condenser  | -6.20e+05 | 9.80e-01 | 5.37e-01 | 6.34e+05 | nan | nan |  nan |     nan |  nan |    nan |
| evaporator |  4.37e+05 | 9.80e-01 | 1.17e-01 | 2.11e+04 | nan | nan |  nan |     nan |  nan |    nan |
+------------+-----------+----------+----------+----------+-----+-----+------+---------+------+--------+
##### RESULTS (CycleCloser) #####
+--------------+------------------+-------------------+
|              |   mass_deviation |   fluid_deviation |
|--------------+------------------+-------------------|
| cycle closer |         0.00e+00 |          0.00e+00 |
+--------------+------------------+-------------------+
##### RESULTS (Valve) #####
+-----------------+----------+----------+----------+
|                 |       pr |       dp |     zeta |
|-----------------+----------+----------+----------|
| expansion valve | 2.22e-01 | 2.05e+01 | 1.03e+07 |
+-----------------+----------+----------+----------+
##### RESULTS (Connection) #####
+----+-----------+-----------+-----------+-----------+-----------+---------+
|    |         m |         p |         h |         T |         x | phase   |
|----+-----------+-----------+-----------+-----------+-----------+---------|
|  0 | 5.000e+00 | 5.834e+00 | 3.224e+02 | 2.066e+01 | 5.173e-01 | tp      |
|  1 | 5.000e+00 | 5.834e+00 | 3.224e+02 | 2.066e+01 | 5.173e-01 | tp      |
|  2 | 5.000e+00 | 5.717e+00 | 4.097e+02 | 2.000e+01 | 1.000e+00 | tp      |
|  3 | 5.000e+00 | 2.687e+01 | 4.465e+02 | 9.117e+01 | 1.000e+00 | g       |
|  4 | 5.000e+00 | 2.633e+01 | 3.224e+02 | 8.000e+01 | 0.000e+00 | tp      |
+----+-----------+-----------+-----------+-----------+-----------+---------+

Se puede observar que el calor transferido por el condensador ahora es resultado del flujo másico especificado. Podríamos hacer algo similar, por ejemplo, con la temperatura del disipador de calor. La especificamos en nuestra configuración inicial. Ahora queremos insertar un compresor con una relación de presión de salida a entrada fija. En ese caso, no podemos elegir la temperatura de condensación, pero será resultado de esa especificación: 

>>cp.set_attr(pr=4)

>>c4.set_attr(T=None)

>>my_plant_one.solve('design')

>>my_plant_one.print_results()

>>> 

DEBUG:TESPyLogger:Solver properties:
 - mode: design
 - init_path: None
 - design_path: None
 - min_iter: 4
 - max_iter: 50
DEBUG:TESPyLogger:Network information:
 - Number of components: 5
 - Number of connections: 5
 - Number of busses: 0
DEBUG:TESPyLogger:Removing 4 mass flow variables from system variables.
DEBUG:TESPyLogger:Updated fluid property SI values and fluid mass fraction for user specified connection parameters.
DEBUG:TESPyLogger:The component compressor has 0 variables.
DEBUG:TESPyLogger:The component condenser has 0 variables.
DEBUG:TESPyLogger:The component cycle closer has 0 variables.
DEBUG:TESPyLogger:The component evaporator has 0 variables.
DEBUG:TESPyLogger:The component expansion valve has 0 variables.
DEBUG:TESPyLogger:Generic fluid property specification complete.
INFO:TESPyLogger:Network initialised.
INFO:TESPyLogger:Starting solver.
DEBUG:TESPyLogger:Number of connection equations: 1.
DEBUG:TESPyLogger:Number of bus equations: 0.
DEBUG:TESPyLogger:Number of component equations: 7.
DEBUG:TESPyLogger:Number of user defined equations: 0.
DEBUG:TESPyLogger:Total number of variables: 8.
DEBUG:TESPyLogger:Number of component variables: 0.
DEBUG:TESPyLogger:Number of connection variables: 8.
PROGRESS:TESPyLogger: iter  | residual   | progress   | massflow   | pressure   | enthalpy   | fluid      | component  
PROGRESS:TESPyLogger:-------+------------+------------+------------+------------+------------+------------+------------
PROGRESS:TESPyLogger: 1     | 4.00e+05   | 4 %        | 0.00e+00   | 5.60e+05   | 2.33e+04   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 2     | 4.17e+02   | 37 %       | 0.00e+00   | 4.66e-10   | 6.33e+02   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 3     | 1.82e-11   | 100 %      | 0.00e+00   | 0.00e+00   | 2.14e-11   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 4     | 1.82e-11   | 100 %      | 0.00e+00   | 0.00e+00   | 2.14e-11   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger:-------+------------+------------+------------+------------+------------+------------+------------
DEBUG:TESPyLogger:Total iterations: 4, Calculation time: 0.03 s, Iterations per second: 147.70
INFO:TESPyLogger:Postprocessing complete.
INFO:TESPyLogger:Calculation complete.
RESULT:TESPyLogger:
##### RESULTS (Compressor) #####
+------------+----------+----------+-----------+----------+--------+
|            |        P |       pr |        dp |    eta_s |   igva |
|------------+----------+----------+-----------+----------+--------|
| compressor | 1.66e+05 | 4.00e+00 | -1.72e+01 | 8.50e-01 |    nan |
+------------+----------+----------+-----------+----------+--------+
##### RESULTS (SimpleHeatExchanger) #####
+------------+-----------+----------+----------+----------+-----+-----+------+---------+------+--------+
|            |         Q |       pr |       dp |     zeta |   D |   L |   ks |   ks_HW |   kA |   Tamb |
|------------+-----------+----------+----------+----------+-----+-----+------+---------+------+--------|
| condenser  | -6.70e+05 | 9.80e-01 | 4.57e-01 | 4.62e+05 | nan | nan |  nan |     nan |  nan |    nan |
| evaporator |  5.05e+05 | 9.80e-01 | 1.17e-01 | 2.21e+04 | nan | nan |  nan |     nan |  nan |    nan |
+------------+-----------+----------+----------+----------+-----+-----+------+---------+------+--------+
##### RESULTS (CycleCloser) #####
+--------------+------------------+-------------------+
|              |   mass_deviation |   fluid_deviation |
|--------------+------------------+-------------------|
| cycle closer |         0.00e+00 |          0.00e+00 |
+--------------+------------------+-------------------+
##### RESULTS (Valve) #####
+-----------------+----------+----------+----------+
|                 |       pr |       dp |     zeta |
|-----------------+----------+----------+----------|
| expansion valve | 2.60e-01 | 1.66e+01 | 9.58e+06 |
+-----------------+----------+----------+----------+
##### RESULTS (Connection) #####
+----+-----------+-----------+-----------+-----------+-----------+---------+
|    |         m |         p |         h |         T |         x | phase   |
|----+-----------+-----------+-----------+-----------+-----------+---------|
|  0 | 5.000e+00 | 5.834e+00 | 3.088e+02 | 2.066e+01 | 4.424e-01 | tp      |
|  1 | 5.000e+00 | 5.834e+00 | 3.088e+02 | 2.066e+01 | 4.424e-01 | tp      |
|  2 | 5.000e+00 | 5.717e+00 | 4.097e+02 | 2.000e+01 | 1.000e+00 | tp      |
|  3 | 5.000e+00 | 2.287e+01 | 4.429e+02 | 8.245e+01 | 1.000e+00 | g       |
|  4 | 5.000e+00 | 2.241e+01 | 3.088e+02 | 7.257e+01 | 0.000e+00 | tp      |
+----+-----------+-----------+-----------+-----------+-----------+---------+

 iter  | residual   | progress   | massflow   | pressure   | enthalpy   | fluid      | component  
-------+------------+------------+------------+------------+------------+------------+------------
 1     | 4.00e+05   | 4 %        | 0.00e+00   | 5.60e+05   | 2.33e+04   | 0.00e+00   | 0.00e+00   
 2     | 4.17e+02   | 37 %       | 0.00e+00   | 4.66e-10   | 6.33e+02   | 0.00e+00   | 0.00e+00   
 3     | 1.82e-11   | 100 %      | 0.00e+00   | 0.00e+00   | 2.14e-11   | 0.00e+00   | 0.00e+00   
 4     | 1.82e-11   | 100 %      | 0.00e+00   | 0.00e+00   | 2.14e-11   | 0.00e+00   | 0.00e+00   
Total iterations: 4, Calculation time: 0.03 s, Iterations per second: 147.70

##### RESULTS (Compressor) #####
+------------+----------+----------+-----------+----------+--------+
|            |        P |       pr |        dp |    eta_s |   igva |
|------------+----------+----------+-----------+----------+--------|
| compressor | 1.66e+05 | 4.00e+00 | -1.72e+01 | 8.50e-01 |    nan |
+------------+----------+----------+-----------+----------+--------+
##### RESULTS (SimpleHeatExchanger) #####
+------------+-----------+----------+----------+----------+-----+-----+------+---------+------+--------+
|            |         Q |       pr |       dp |     zeta |   D |   L |   ks |   ks_HW |   kA |   Tamb |
|------------+-----------+----------+----------+----------+-----+-----+------+---------+------+--------|
| condenser  | -6.70e+05 | 9.80e-01 | 4.57e-01 | 4.62e+05 | nan | nan |  nan |     nan |  nan |    nan |
| evaporator |  5.05e+05 | 9.80e-01 | 1.17e-01 | 2.21e+04 | nan | nan |  nan |     nan |  nan |    nan |
+------------+-----------+----------+----------+----------+-----+-----+------+---------+------+--------+
##### RESULTS (CycleCloser) #####
+--------------+------------------+-------------------+
|              |   mass_deviation |   fluid_deviation |
|--------------+------------------+-------------------|
| cycle closer |         0.00e+00 |          0.00e+00 |
+--------------+------------------+-------------------+
##### RESULTS (Valve) #####
+-----------------+----------+----------+----------+
|                 |       pr |       dp |     zeta |
|-----------------+----------+----------+----------|
| expansion valve | 2.60e-01 | 1.66e+01 | 9.58e+06 |
+-----------------+----------+----------+----------+
##### RESULTS (Connection) #####
+----+-----------+-----------+-----------+-----------+-----------+---------+
|    |         m |         p |         h |         T |         x | phase   |
|----+-----------+-----------+-----------+-----------+-----------+---------|
|  0 | 5.000e+00 | 5.834e+00 | 3.088e+02 | 2.066e+01 | 4.424e-01 | tp      |
|  1 | 5.000e+00 | 5.834e+00 | 3.088e+02 | 2.066e+01 | 4.424e-01 | tp      |
|  2 | 5.000e+00 | 5.717e+00 | 4.097e+02 | 2.000e+01 | 1.000e+00 | tp      |
|  3 | 5.000e+00 | 2.287e+01 | 4.429e+02 | 8.245e+01 | 1.000e+00 | g       |
|  4 | 5.000e+00 | 2.241e+01 | 3.088e+02 | 7.257e+01 | 0.000e+00 | tp      |
+----+-----------+-----------+-----------+-----------+-----------+---------+ 

O bien, tenemos una planta en funcionamiento con observación de datos. Nos indica la temperatura de salida del compresor y queremos saber cuál sería su eficiencia si medimos T=97.3en la conexión 3.

>>cp.set_attr(pr=None, eta_s=None)

>># eta_s: eficiencia del compresor

>>c3.set_attr(T=97.3)

>>c4.set_attr(T=80)

>>my_plant_one.solve('design')

>>my_plant_one.print_results()

>>> 

DEBUG:TESPyLogger:Solver properties:
 - mode: design
 - init_path: None
 - design_path: None
 - min_iter: 4
 - max_iter: 50
DEBUG:TESPyLogger:Network information:
 - Number of components: 5
 - Number of connections: 5
 - Number of busses: 0
DEBUG:TESPyLogger:Removing 4 mass flow variables from system variables.
DEBUG:TESPyLogger:Updated fluid property SI values and fluid mass fraction for user specified connection parameters.
DEBUG:TESPyLogger:The component compressor has 0 variables.
DEBUG:TESPyLogger:The component condenser has 0 variables.
DEBUG:TESPyLogger:The component cycle closer has 0 variables.
DEBUG:TESPyLogger:The component evaporator has 0 variables.
DEBUG:TESPyLogger:The component expansion valve has 0 variables.
DEBUG:TESPyLogger:Generic fluid property specification complete.
INFO:TESPyLogger:Network initialised.
INFO:TESPyLogger:Starting solver.
DEBUG:TESPyLogger:Number of connection equations: 1.
DEBUG:TESPyLogger:Number of bus equations: 0.
DEBUG:TESPyLogger:Number of component equations: 5.
DEBUG:TESPyLogger:Number of user defined equations: 0.
DEBUG:TESPyLogger:Total number of variables: 6.
DEBUG:TESPyLogger:Number of component variables: 0.
DEBUG:TESPyLogger:Number of connection variables: 6.
PROGRESS:TESPyLogger: iter  | residual   | progress   | massflow   | pressure   | enthalpy   | fluid      | component  
PROGRESS:TESPyLogger:-------+------------+------------+------------+------------+------------+------------+------------
PROGRESS:TESPyLogger: 1     | 3.92e+05   | 4 %        | 0.00e+00   | 4.00e+05   | 2.27e+04   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 2     | 4.72e-01   | 70 %       | 0.00e+00   | 0.00e+00   | 6.76e+02   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 3     | 1.16e-03   | 99 %       | 0.00e+00   | 0.00e+00   | 1.65e+00   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 4     | 6.78e-09   | 100 %      | 0.00e+00   | 0.00e+00   | 9.66e-06   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 5     | 5.68e-14   | 100 %      | 0.00e+00   | 0.00e+00   | 8.10e-11   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger:-------+------------+------------+------------+------------+------------+------------+------------
DEBUG:TESPyLogger:Total iterations: 5, Calculation time: 0.02 s, Iterations per second: 216.04
INFO:TESPyLogger:Postprocessing complete.
INFO:TESPyLogger:Calculation complete.
RESULT:TESPyLogger:
##### RESULTS (Compressor) #####
+------------+----------+----------+-----------+----------+--------+
|            |        P |       pr |        dp |    eta_s |   igva |
|------------+----------+----------+-----------+----------+--------|
| compressor | 2.29e+05 | 4.70e+00 | -2.12e+01 | 6.82e-01 |    nan |
+------------+----------+----------+-----------+----------+--------+
##### RESULTS (SimpleHeatExchanger) #####
+------------+-----------+----------+----------+----------+-----+-----+------+---------+------+--------+
|            |         Q |       pr |       dp |     zeta |   D |   L |   ks |   ks_HW |   kA |   Tamb |
|------------+-----------+----------+----------+----------+-----+-----+------+---------+------+--------|
| condenser  | -6.66e+05 | 9.80e-01 | 5.37e-01 | 5.99e+05 | nan | nan |  nan |     nan |  nan |    nan |
| evaporator |  4.37e+05 | 9.80e-01 | 1.17e-01 | 2.11e+04 | nan | nan |  nan |     nan |  nan |    nan |
+------------+-----------+----------+----------+----------+-----+-----+------+---------+------+--------+
##### RESULTS (CycleCloser) #####
+--------------+------------------+-------------------+
|              |   mass_deviation |   fluid_deviation |
|--------------+------------------+-------------------|
| cycle closer |         0.00e+00 |          0.00e+00 |
+--------------+------------------+-------------------+
##### RESULTS (Valve) #####
+-----------------+----------+----------+----------+
|                 |       pr |       dp |     zeta |
|-----------------+----------+----------+----------|
| expansion valve | 2.22e-01 | 2.05e+01 | 1.03e+07 |
+-----------------+----------+----------+----------+
##### RESULTS (Connection) #####
+----+-----------+-----------+-----------+-----------+-----------+---------+
|    |         m |         p |         h |         T |         x | phase   |
|----+-----------+-----------+-----------+-----------+-----------+---------|
|  0 | 5.000e+00 | 5.834e+00 | 3.224e+02 | 2.066e+01 | 5.173e-01 | tp      |
|  1 | 5.000e+00 | 5.834e+00 | 3.224e+02 | 2.066e+01 | 5.173e-01 | tp      |
|  2 | 5.000e+00 | 5.717e+00 | 4.097e+02 | 2.000e+01 | 1.000e+00 | tp      |
|  3 | 5.000e+00 | 2.687e+01 | 4.555e+02 | 9.730e+01 | 1.000e+00 | g       |
|  4 | 5.000e+00 | 2.633e+01 | 3.224e+02 | 8.000e+01 | 0.000e+00 | tp      |
+----+-----------+-----------+-----------+-----------+-----------+---------+

 iter  | residual   | progress   | massflow   | pressure   | enthalpy   | fluid      | component  
-------+------------+------------+------------+------------+------------+------------+------------
 1     | 3.92e+05   | 4 %        | 0.00e+00   | 4.00e+05   | 2.27e+04   | 0.00e+00   | 0.00e+00   
 2     | 4.72e-01   | 70 %       | 0.00e+00   | 0.00e+00   | 6.76e+02   | 0.00e+00   | 0.00e+00   
 3     | 1.16e-03   | 99 %       | 0.00e+00   | 0.00e+00   | 1.65e+00   | 0.00e+00   | 0.00e+00   
 4     | 6.78e-09   | 100 %      | 0.00e+00   | 0.00e+00   | 9.66e-06   | 0.00e+00   | 0.00e+00   
 5     | 5.68e-14   | 100 %      | 0.00e+00   | 0.00e+00   | 8.10e-11   | 0.00e+00   | 0.00e+00   
Total iterations: 5, Calculation time: 0.02 s, Iterations per second: 216.04

##### RESULTS (Compressor) #####
+------------+----------+----------+-----------+----------+--------+
|            |        P |       pr |        dp |    eta_s |   igva |
|------------+----------+----------+-----------+----------+--------|
| compressor | 2.29e+05 | 4.70e+00 | -2.12e+01 | 6.82e-01 |    nan |
+------------+----------+----------+-----------+----------+--------+
##### RESULTS (SimpleHeatExchanger) #####
+------------+-----------+----------+----------+----------+-----+-----+------+---------+------+--------+
|            |         Q |       pr |       dp |     zeta |   D |   L |   ks |   ks_HW |   kA |   Tamb |
|------------+-----------+----------+----------+----------+-----+-----+------+---------+------+--------|
| condenser  | -6.66e+05 | 9.80e-01 | 5.37e-01 | 5.99e+05 | nan | nan |  nan |     nan |  nan |    nan |
| evaporator |  4.37e+05 | 9.80e-01 | 1.17e-01 | 2.11e+04 | nan | nan |  nan |     nan |  nan |    nan |
+------------+-----------+----------+----------+----------+-----+-----+------+---------+------+--------+
##### RESULTS (CycleCloser) #####
+--------------+------------------+-------------------+
|              |   mass_deviation |   fluid_deviation |
|--------------+------------------+-------------------|
| cycle closer |         0.00e+00 |          0.00e+00 |
+--------------+------------------+-------------------+
##### RESULTS (Valve) #####
+-----------------+----------+----------+----------+
|                 |       pr |       dp |     zeta |
|-----------------+----------+----------+----------|
| expansion valve | 2.22e-01 | 2.05e+01 | 1.03e+07 |
+-----------------+----------+----------+----------+
##### RESULTS (Connection) #####
+----+-----------+-----------+-----------+-----------+-----------+---------+
|    |         m |         p |         h |         T |         x | phase   |
|----+-----------+-----------+-----------+-----------+-----------+---------|
|  0 | 5.000e+00 | 5.834e+00 | 3.224e+02 | 2.066e+01 | 5.173e-01 | tp      |
|  1 | 5.000e+00 | 5.834e+00 | 3.224e+02 | 2.066e+01 | 5.173e-01 | tp      |
|  2 | 5.000e+00 | 5.717e+00 | 4.097e+02 | 2.000e+01 | 1.000e+00 | tp      |
|  3 | 5.000e+00 | 2.687e+01 | 4.555e+02 | 9.730e+01 | 1.000e+00 | g       |
|  4 | 5.000e+00 | 2.633e+01 | 3.224e+02 | 8.000e+01 | 0.000e+00 | tp      |
+----+-----------+-----------+-----------+-----------+-----------+---------+ 

Errores típicos

Si sobrevalora o subestima el sistema especificando muy pocos o demasiados parámetros, recibirá un mensaje de error. Podríamos configurar la demanda de calor y el caudal másico simultáneamente.

Atención

¡Los dos ejemplos de código de esta sección no están incluidos en el script descargable!

>>co.set_attr(Q=-1e6)
>>c1.set_attr(m=5)

>>my_plant_one.solve('design')

Error

ERROR:root:You have provided too many parameters: 20 required, 21 supplied. Aborting calculation!
Traceback (most recent call last):
File ".\tutorial\basics\heat_pump.py", line 59, in <module>
    my_plant.solve('design')
File "c:\users\user\documents\github\tespy\src\tespy\networks\network.py", line 1623, in solve
    self.solve_determination()
File "c:\users\user\documents\github\tespy\src\tespy\networks\network.py", line 1749, in solve_determination
    raise hlp.TESPyNetworkError(msg)
tespy.tools.helpers.TESPyNetworkError: You have provided too many parameters: 20 required, 21 supplied. Aborting calculation!

Si se realiza una especificación que resulta en la cantidad correcta de parámetros, pero causa una dependencia lineal en el sistema de ecuaciones, el mensaje de error no será tan claro. Para un ejemplo sencillo, podemos establecer el caudal másico en las conexiones 1 y 2 sin establecer la demanda de calor ni la temperatura de evaporación. En este caso, el número de ecuaciones será correcto, pero la especificación, obviamente, carecerá de sentido.

>>co.set_attr(Q=None)
>>c1.set_attr(m=5)
>>c2.set_attr(m=5, T=None)

>>my_plant_one.solve('design')

Error

ERROR:root:Singularity in jacobian matrix, calculation aborted! Make sure your network does not have any linear dependencies in the parametrisation. Other reasons might be
-> given temperature with given pressure in two phase region, try setting enthalpy instead or provide accurate starting value for pressure.
-> given logarithmic temperature differences or kA-values for heat exchangers,
-> support better starting values.
-> bad starting value for fuel mass flow of combustion chamber, provide small (near to zero, but not zero) starting value.

Véase también

Para obtener información más detallada sobre la cantidad de variables involucradas y las formas de especificación de parámetros, vaya a la sección de módulos TESPy dentro del capítulo Documentación.

Otra causa frecuente de estos errores son los valores iniciales incorrectos. Tenemos un tutorial dedicado específicamente a este tema aquí .

Análisis paramétrico del COP

Para una cantidad constante de producción de calor, investigaremos la influencia de

• el nivel de temperatura de la fuente

• El nivel de temperatura del fregadero y

• la eficiencia isentrópica del compresor.

Para ello, importamos los paquetes numpy y matplotlib, definimos los rangos y, a continuación, iteramos sobre un bucle y reiniciamos la simulación para cada parámetro de entrada. Tras cada bucle, restablecemos el valor original del parámetro correspondiente. Recopilamos los resultados en listas y, finalmente, podemos crear un diagrama de dispersión con matplotlib.

>># first go back to the original state of the specifications

>>co.set_attr(Q=-1e6)

>>cp.set_attr(pr=None, eta_s=0.85)

>>c1.set_attr(m=None)

>>c3.set_attr(T=None)

>>c4.set_attr(T=80)

>>import matplotlib.pyplot as plt

>>import numpy as np

>># make text reasonably sized

>>plt.rc('font', **{'size': 18})

>>data = {

    'T_source': np.linspace(0, 40, 11),

    'T_sink': np.linspace(60, 100, 11),

    'eta_s': np.linspace(0.75, 0.95, 11) * 100

>>}

>>COP = {

    'T_source': [],

    'T_sink': [],

    'eta_s': []

>>}

>>description = {

    'T_source': 'Evaporation temperature in °C',

    'T_sink': 'Condensation temperature in °C',

    'eta_s': 'Isentropic efficiency in %'

>>}

>>for T in data['T_source']:

>>    c2.set_attr(T=T)

>>    my_plant_one.solve('design')

>>    COP['T_source'] += [abs(co.Q.val) / cp.P.val]

>># reset to base temperature

>>c2.set_attr(T=20)

>>for T in data['T_sink']:

>>    c4.set_attr(T=T)

>>    my_plant_one.solve('design')

>>    COP['T_sink'] += [abs(co.Q.val) / cp.P.val]

>># reset to base temperature

>>c4.set_attr(T=80)

>>for eta_s in data['eta_s']:

>>    cp.set_attr(eta_s=eta_s / 100)

>>    my_plant_one.solve('design')

>>    COP['eta_s'] += [abs(co.Q.val) / cp.P.val]

>>fig, ax = plt.subplots(1, 3, sharey=True, figsize=(16, 8))

>>[a.grid() for a in ax]

>>i = 0

>>for key in data:

>>    ax[i].scatter(data[key], COP[key], s=100, color="#1f567d")

>>    ax[i].set_xlabel(description[key])

>>    i += 1

>>ax[0].set_ylabel('COP of the heat pump')

>>plt.tight_layout()

>>fig.savefig('heat_pump_parametric.svg')

DEBUG:TESPyLogger:Solver properties:
 - mode: design
 - init_path: None
 - design_path: None
 - min_iter: 4
 - max_iter: 50
DEBUG:TESPyLogger:Network information:
 - Number of components: 5
 - Number of connections: 5
 - Number of busses: 0
DEBUG:TESPyLogger:Updated fluid property SI values and fluid mass fraction for user specified connection parameters.
DEBUG:TESPyLogger:The component compressor has 0 variables.
DEBUG:TESPyLogger:The component condenser has 0 variables.
DEBUG:TESPyLogger:The component cycle closer has 0 variables.
DEBUG:TESPyLogger:The component evaporator has 0 variables.
DEBUG:TESPyLogger:The component expansion valve has 0 variables.
DEBUG:TESPyLogger:Generic fluid property specification complete.
INFO:TESPyLogger:Network initialised.
INFO:TESPyLogger:Starting solver.
DEBUG:TESPyLogger:Number of connection equations: 0.
DEBUG:TESPyLogger:Number of bus equations: 0.
DEBUG:TESPyLogger:Number of component equations: 7.
DEBUG:TESPyLogger:Number of user defined equations: 0.
DEBUG:TESPyLogger:Total number of variables: 7.
DEBUG:TESPyLogger:Number of component variables: 0.
DEBUG:TESPyLogger:Number of connection variables: 7.
PROGRESS:TESPyLogger: iter  | residual   | progress   | massflow   | pressure   | enthalpy   | fluid      | component  
PROGRESS:TESPyLogger:-------+------------+------------+------------+------------+------------+------------+------------
PROGRESS:TESPyLogger: 1     | 4.35e+05   | 4 %        | 2.63e+00   | 4.02e+05   | 3.24e+03   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 2     | 8.53e+03   | 22 %       | 6.56e-02   | 0.00e+00   | 2.57e-11   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 3     | 2.34e-10   | 100 %      | 2.71e-16   | 0.00e+00   | 2.57e-11   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 4     | 2.34e-10   | 100 %      | 2.71e-16   | 0.00e+00   | 2.57e-11   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger:-------+------------+------------+------------+------------+------------+------------+------------
DEBUG:TESPyLogger:Total iterations: 4, Calculation time: 0.02 s, Iterations per second: 229.74
INFO:TESPyLogger:Postprocessing complete.
INFO:TESPyLogger:Calculation complete.
DEBUG:TESPyLogger:Solver properties:
 - mode: design
 - init_path: None
 - design_path: None
 - min_iter: 4
 - max_iter: 50
DEBUG:TESPyLogger:Network information:
 - Number of components: 5
 - Number of connections: 5
 - Number of busses: 0
DEBUG:TESPyLogger:Updated fluid property SI values and fluid mass fraction for user specified connection parameters.
DEBUG:TESPyLogger:The component compressor has 0 variables.
DEBUG:TESPyLogger:The component condenser has 0 variables.
DEBUG:TESPyLogger:The component cycle closer has 0 variables.
DEBUG:TESPyLogger:The component evaporator has 0 variables.
DEBUG:TESPyLogger:The component expansion valve has 0 variables.
DEBUG:TESPyLogger:Generic fluid property specification complete.
INFO:TESPyLogger:Network initialised.
INFO:TESPyLogger:Starting solver.
DEBUG:TESPyLogger:Number of connection equations: 0.
DEBUG:TESPyLogger:Number of bus equations: 0.
DEBUG:TESPyLogger:Number of component equations: 7.
DEBUG:TESPyLogger:Number of user defined equations: 0.
DEBUG:TESPyLogger:Total number of variables: 7.
DEBUG:TESPyLogger:Number of component variables: 0.
DEBUG:TESPyLogger:Number of connection variables: 7.
PROGRESS:TESPyLogger: iter  | residual   | progress   | massflow   | pressure   | enthalpy   | fluid      | component  
PROGRESS:TESPyLogger:-------+------------+------------+------------+------------+------------+------------+------------
PROGRESS:TESPyLogger: 1     | 4.49e+04   | 14 %       | 7.79e-02   | 6.47e+04   | 1.31e+03   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 2     | 1.02e+02   | 44 %       | 7.96e-04   | 4.83e-10   | 8.10e-11   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 3     | 2.36e-10   | 100 %      | 4.40e-15   | 0.00e+00   | 4.28e-11   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 4     | 1.17e-10   | 100 %      | 3.88e-16   | 0.00e+00   | 8.56e-12   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger:-------+------------+------------+------------+------------+------------+------------+------------
DEBUG:TESPyLogger:Total iterations: 4, Calculation time: 0.02 s, Iterations per second: 189.21

 iter  | residual   | progress   | massflow   | pressure   | enthalpy   | fluid      | component  
-------+------------+------------+------------+------------+------------+------------+------------
 1     | 4.35e+05   | 4 %        | 2.63e+00   | 4.02e+05   | 3.24e+03   | 0.00e+00   | 0.00e+00   
 2     | 8.53e+03   | 22 %       | 6.56e-02   | 0.00e+00   | 2.57e-11   | 0.00e+00   | 0.00e+00   
 3     | 2.34e-10   | 100 %      | 2.71e-16   | 0.00e+00   | 2.57e-11   | 0.00e+00   | 0.00e+00   
 4     | 2.34e-10   | 100 %      | 2.71e-16   | 0.00e+00   | 2.57e-11   | 0.00e+00   | 0.00e+00   
Total iterations: 4, Calculation time: 0.02 s, Iterations per second: 229.74

 iter  | residual   | progress   | massflow   | pressure   | enthalpy   | fluid      | component  
-------+------------+------------+------------+------------+------------+------------+------------
 1     | 4.49e+04   | 14 %       | 7.79e-02   | 6.47e+04   | 1.31e+03   | 0.00e+00   | 0.00e+00   
 2     | 1.02e+02   | 44 %       | 7.96e-04   | 4.83e-10   | 8.10e-11   | 0.00e+00   | 0.00e+00   
 3     | 2.36e-10   | 100 %      | 4.40e-15   | 0.00e+00   | 4.28e-11   | 0.00e+00   | 0.00e+00   
 4     | 1.17e-10   | 100 %      | 3.88e-16   | 0.00e+00   | 8.56e-12   | 0.00e+00   | 0.00e+00   
Total iterations: 4, Calculation time: 0.02 s, Iterations per second: 189.21

INFO:TESPyLogger:Postprocessing complete.
INFO:TESPyLogger:Calculation complete.
DEBUG:TESPyLogger:Solver properties:
 - mode: design
 - init_path: None
 - design_path: None
 - min_iter: 4
 - max_iter: 50
DEBUG:TESPyLogger:Network information:
 - Number of components: 5
 - Number of connections: 5
 - Number of busses: 0
DEBUG:TESPyLogger:Updated fluid property SI values and fluid mass fraction for user specified connection parameters.
DEBUG:TESPyLogger:The component compressor has 0 variables.
DEBUG:TESPyLogger:The component condenser has 0 variables.
DEBUG:TESPyLogger:The component cycle closer has 0 variables.
DEBUG:TESPyLogger:The component evaporator has 0 variables.
DEBUG:TESPyLogger:The component expansion valve has 0 variables.
DEBUG:TESPyLogger:Generic fluid property specification complete.
INFO:TESPyLogger:Network initialised.
INFO:TESPyLogger:Starting solver.
DEBUG:TESPyLogger:Number of connection equations: 0.
DEBUG:TESPyLogger:Number of bus equations: 0.
DEBUG:TESPyLogger:Number of component equations: 7.
DEBUG:TESPyLogger:Number of user defined equations: 0.
DEBUG:TESPyLogger:Total number of variables: 7.
DEBUG:TESPyLogger:Number of component variables: 0.
DEBUG:TESPyLogger:Number of connection variables: 7.
PROGRESS:TESPyLogger: iter  | residual   | progress   | massflow   | pressure   | enthalpy   | fluid      | component  
PROGRESS:TESPyLogger:-------+------------+------------+------------+------------+------------+------------+------------
PROGRESS:TESPyLogger: 1     | 5.00e+04   | 14 %       | 7.43e-02   | 7.21e+04   | 1.23e+03   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 2     | 9.13e+01   | 44 %       | 7.17e-04   | 0.00e+00   | 2.82e-10   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 3     | 7.28e-12   | 100 %      | 5.28e-16   | 0.00e+00   | 8.56e-12   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 4     | 1.17e-10   | 100 %      | 3.86e-16   | 0.00e+00   | 8.56e-12   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger:-------+------------+------------+------------+------------+------------+------------+------------
DEBUG:TESPyLogger:Total iterations: 4, Calculation time: 0.02 s, Iterations per second: 245.21
INFO:TESPyLogger:Postprocessing complete.
INFO:TESPyLogger:Calculation complete.
DEBUG:TESPyLogger:Solver properties:
 - mode: design
 - init_path: None
 - design_path: None
 - min_iter: 4
 - max_iter: 50
DEBUG:TESPyLogger:Network information:
 - Number of components: 5
 - Number of connections: 5
 - Number of busses: 0
DEBUG:TESPyLogger:Updated fluid property SI values and fluid mass fraction for user specified connection parameters.
DEBUG:TESPyLogger:The component compressor has 0 variables.
DEBUG:TESPyLogger:The component condenser has 0 variables.
DEBUG:TESPyLogger:The component cycle closer has 0 variables.
DEBUG:TESPyLogger:The component evaporator has 0 variables.
DEBUG:TESPyLogger:The component expansion valve has 0 variables.
DEBUG:TESPyLogger:Generic fluid property specification complete.
INFO:TESPyLogger:Network initialised.
INFO:TESPyLogger:Starting solver.
DEBUG:TESPyLogger:Number of connection equations: 0.
DEBUG:TESPyLogger:Number of bus equations: 0.
DEBUG:TESPyLogger:Number of component equations: 7.
DEBUG:TESPyLogger:Number of user defined equations: 0.
DEBUG:TESPyLogger:Total number of variables: 7.
DEBUG:TESPyLogger:Number of component variables: 0.
DEBUG:TESPyLogger:Number of connection variables: 7.
PROGRESS:TESPyLogger: iter  | residual   | progress   | massflow   | pressure   | enthalpy   | fluid      | component  
PROGRESS:TESPyLogger:-------+------------+------------+------------+------------+------------+------------+------------
PROGRESS:TESPyLogger: 1     | 5.54e+04   | 13 %       | 7.11e-02   | 8.00e+04   | 1.15e+03   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 2     | 8.21e+01   | 45 %       | 6.50e-04   | 0.00e+00   | 3.42e-11   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 3     | 2.34e-10   | 100 %      | 2.33e-16   | 0.00e+00   | 2.57e-11   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 4     | 2.34e-10   | 100 %      | 2.33e-16   | 0.00e+00   | 2.57e-11   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger:-------+------------+------------+------------+------------+------------+------------+------------
DEBUG:TESPyLogger:Total iterations: 4, Calculation time: 0.02 s, Iterations per second: 213.28
INFO:TESPyLogger:Postprocessing complete.
INFO:TESPyLogger:Calculation complete.
DEBUG:TESPyLogger:Solver properties:
 - mode: design
 - init_path: None
 - design_path: None
 - min_iter: 4
 - max_iter: 50
DEBUG:TESPyLogger:Network information:
 - Number of components: 5
 - Number of connections: 5
 - Number of busses: 0
DEBUG:TESPyLogger:Updated fluid property SI values and fluid mass fraction for user specified connection parameters.
DEBUG:TESPyLogger:The component compressor has 0 variables.
DEBUG:TESPyLogger:The component condenser has 0 variables.
DEBUG:TESPyLogger:The component cycle closer has 0 variables.

 iter  | residual   | progress   | massflow   | pressure   | enthalpy   | fluid      | component  
-------+------------+------------+------------+------------+------------+------------+------------
 1     | 5.00e+04   | 14 %       | 7.43e-02   | 7.21e+04   | 1.23e+03   | 0.00e+00   | 0.00e+00   
 2     | 9.13e+01   | 44 %       | 7.17e-04   | 0.00e+00   | 2.82e-10   | 0.00e+00   | 0.00e+00   
 3     | 7.28e-12   | 100 %      | 5.28e-16   | 0.00e+00   | 8.56e-12   | 0.00e+00   | 0.00e+00   
 4     | 1.17e-10   | 100 %      | 3.86e-16   | 0.00e+00   | 8.56e-12   | 0.00e+00   | 0.00e+00   
Total iterations: 4, Calculation time: 0.02 s, Iterations per second: 245.21

 iter  | residual   | progress   | massflow   | pressure   | enthalpy   | fluid      | component  
-------+------------+------------+------------+------------+------------+------------+------------
 1     | 5.54e+04   | 13 %       | 7.11e-02   | 8.00e+04   | 1.15e+03   | 0.00e+00   | 0.00e+00   
 2     | 8.21e+01   | 45 %       | 6.50e-04   | 0.00e+00   | 3.42e-11   | 0.00e+00   | 0.00e+00   
 3     | 2.34e-10   | 100 %      | 2.33e-16   | 0.00e+00   | 2.57e-11   | 0.00e+00   | 0.00e+00   
 4     | 2.34e-10   | 100 %      | 2.33e-16   | 0.00e+00   | 2.57e-11   | 0.00e+00   | 0.00e+00   
Total iterations: 4, Calculation time: 0.02 s, Iterations per second: 213.28

DEBUG:TESPyLogger:The component evaporator has 0 variables.
DEBUG:TESPyLogger:The component expansion valve has 0 variables.
DEBUG:TESPyLogger:Generic fluid property specification complete.
INFO:TESPyLogger:Network initialised.
INFO:TESPyLogger:Starting solver.
DEBUG:TESPyLogger:Number of connection equations: 0.
DEBUG:TESPyLogger:Number of bus equations: 0.
DEBUG:TESPyLogger:Number of component equations: 7.
DEBUG:TESPyLogger:Number of user defined equations: 0.
DEBUG:TESPyLogger:Total number of variables: 7.
DEBUG:TESPyLogger:Number of component variables: 0.
DEBUG:TESPyLogger:Number of connection variables: 7.
PROGRESS:TESPyLogger: iter  | residual   | progress   | massflow   | pressure   | enthalpy   | fluid      | component  
PROGRESS:TESPyLogger:-------+------------+------------+------------+------------+------------+------------+------------
PROGRESS:TESPyLogger: 1     | 6.12e+04   | 13 %       | 6.83e-02   | 8.84e+04   | 1.09e+03   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 2     | 7.43e+01   | 45 %       | 5.94e-04   | 0.00e+00   | 2.31e-10   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 3     | 0.00e+00   | 100 %      | 0.00e+00   | 0.00e+00   | 0.00e+00   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 4     | 0.00e+00   | 100 %      | 0.00e+00   | 0.00e+00   | 0.00e+00   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger:-------+------------+------------+------------+------------+------------+------------+------------
DEBUG:TESPyLogger:Total iterations: 4, Calculation time: 0.02 s, Iterations per second: 229.45
INFO:TESPyLogger:Postprocessing complete.
INFO:TESPyLogger:Calculation complete.
DEBUG:TESPyLogger:Solver properties:
 - mode: design
 - init_path: None
 - design_path: None
 - min_iter: 4
 - max_iter: 50
DEBUG:TESPyLogger:Network information:
 - Number of components: 5
 - Number of connections: 5
 - Number of busses: 0
DEBUG:TESPyLogger:Updated fluid property SI values and fluid mass fraction for user specified connection parameters.
DEBUG:TESPyLogger:The component compressor has 0 variables.
DEBUG:TESPyLogger:The component condenser has 0 variables.
DEBUG:TESPyLogger:The component cycle closer has 0 variables.
DEBUG:TESPyLogger:The component evaporator has 0 variables.
DEBUG:TESPyLogger:The component expansion valve has 0 variables.
DEBUG:TESPyLogger:Generic fluid property specification complete.
INFO:TESPyLogger:Network initialised.
INFO:TESPyLogger:Starting solver.
DEBUG:TESPyLogger:Number of connection equations: 0.
DEBUG:TESPyLogger:Number of bus equations: 0.
DEBUG:TESPyLogger:Number of component equations: 7.
DEBUG:TESPyLogger:Number of user defined equations: 0.
DEBUG:TESPyLogger:Total number of variables: 7.
DEBUG:TESPyLogger:Number of component variables: 0.
DEBUG:TESPyLogger:Number of connection variables: 7.
PROGRESS:TESPyLogger: iter  | residual   | progress   | massflow   | pressure   | enthalpy   | fluid      | component  
PROGRESS:TESPyLogger:-------+------------+------------+------------+------------+------------+------------+------------
PROGRESS:TESPyLogger: 1     | 6.75e+04   | 13 %       | 6.59e-02   | 9.73e+04   | 1.03e+03   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 2     | 6.81e+01   | 46 %       | 5.49e-04   | 0.00e+00   | 1.28e-10   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 3     | 2.33e-10   | 100 %      | 1.04e-15   | 0.00e+00   | 1.28e-11   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 4     | 1.09e-11   | 100 %      | 8.34e-16   | 0.00e+00   | 1.28e-11   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger:-------+------------+------------+------------+------------+------------+------------+------------
DEBUG:TESPyLogger:Total iterations: 4, Calculation time: 0.02 s, Iterations per second: 245.00
INFO:TESPyLogger:Postprocessing complete.
INFO:TESPyLogger:Calculation complete.
DEBUG:TESPyLogger:Solver properties:
 - mode: design
 - init_path: None
 - design_path: None
 - min_iter: 4
 - max_iter: 50
DEBUG:TESPyLogger:Network information:
 - Number of components: 5
 - Number of connections: 5
 - Number of busses: 0
DEBUG:TESPyLogger:Updated fluid property SI values and fluid mass fraction for user specified connection parameters.
DEBUG:TESPyLogger:The component compressor has 0 variables.
DEBUG:TESPyLogger:The component condenser has 0 variables.
DEBUG:TESPyLogger:The component cycle closer has 0 variables.
DEBUG:TESPyLogger:The component evaporator has 0 variables.

 iter  | residual   | progress   | massflow   | pressure   | enthalpy   | fluid      | component  
-------+------------+------------+------------+------------+------------+------------+------------
 1     | 6.12e+04   | 13 %       | 6.83e-02   | 8.84e+04   | 1.09e+03   | 0.00e+00   | 0.00e+00   
 2     | 7.43e+01   | 45 %       | 5.94e-04   | 0.00e+00   | 2.31e-10   | 0.00e+00   | 0.00e+00   
 3     | 0.00e+00   | 100 %      | 0.00e+00   | 0.00e+00   | 0.00e+00   | 0.00e+00   | 0.00e+00   
 4     | 0.00e+00   | 100 %      | 0.00e+00   | 0.00e+00   | 0.00e+00   | 0.00e+00   | 0.00e+00   
Total iterations: 4, Calculation time: 0.02 s, Iterations per second: 229.45

 iter  | residual   | progress   | massflow   | pressure   | enthalpy   | fluid      | component  
-------+------------+------------+------------+------------+------------+------------+------------
 1     | 6.75e+04   | 13 %       | 6.59e-02   | 9.73e+04   | 1.03e+03   | 0.00e+00   | 0.00e+00   
 2     | 6.81e+01   | 46 %       | 5.49e-04   | 0.00e+00   | 1.28e-10   | 0.00e+00   | 0.00e+00   
 3     | 2.33e-10   | 100 %      | 1.04e-15   | 0.00e+00   | 1.28e-11   | 0.00e+00   | 0.00e+00   
 4     | 1.09e-11   | 100 %      | 8.34e-16   | 0.00e+00   | 1.28e-11   | 0.00e+00   | 0.00e+00   
Total iterations: 4, Calculation time: 0.02 s, Iterations per second: 245.00

DEBUG:TESPyLogger:The component expansion valve has 0 variables.
DEBUG:TESPyLogger:Generic fluid property specification complete.
INFO:TESPyLogger:Network initialised.
INFO:TESPyLogger:Starting solver.
DEBUG:TESPyLogger:Number of connection equations: 0.
DEBUG:TESPyLogger:Number of bus equations: 0.
DEBUG:TESPyLogger:Number of component equations: 7.
DEBUG:TESPyLogger:Number of user defined equations: 0.
DEBUG:TESPyLogger:Total number of variables: 7.
DEBUG:TESPyLogger:Number of component variables: 0.
DEBUG:TESPyLogger:Number of connection variables: 7.
PROGRESS:TESPyLogger: iter  | residual   | progress   | massflow   | pressure   | enthalpy   | fluid      | component  
PROGRESS:TESPyLogger:-------+------------+------------+------------+------------+------------+------------+------------
PROGRESS:TESPyLogger: 1     | 7.41e+04   | 12 %       | 6.40e-02   | 1.07e+05   | 9.86e+02   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 2     | 6.31e+01   | 46 %       | 5.13e-04   | 0.00e+00   | 3.42e-11   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 3     | 1.18e-10   | 100 %      | 4.66e-16   | 0.00e+00   | 2.14e-11   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 4     | 1.18e-10   | 100 %      | 4.66e-16   | 0.00e+00   | 2.14e-11   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger:-------+------------+------------+------------+------------+------------+------------+------------
DEBUG:TESPyLogger:Total iterations: 4, Calculation time: 0.02 s, Iterations per second: 162.75
INFO:TESPyLogger:Postprocessing complete.
INFO:TESPyLogger:Calculation complete.
DEBUG:TESPyLogger:Solver properties:
 - mode: design
 - init_path: None
 - design_path: None
 - min_iter: 4
 - max_iter: 50
DEBUG:TESPyLogger:Network information:
 - Number of components: 5
 - Number of connections: 5
 - Number of busses: 0
DEBUG:TESPyLogger:Updated fluid property SI values and fluid mass fraction for user specified connection parameters.
DEBUG:TESPyLogger:The component compressor has 0 variables.
DEBUG:TESPyLogger:The component condenser has 0 variables.
DEBUG:TESPyLogger:The component cycle closer has 0 variables.
DEBUG:TESPyLogger:The component evaporator has 0 variables.
DEBUG:TESPyLogger:The component expansion valve has 0 variables.
DEBUG:TESPyLogger:Generic fluid property specification complete.
INFO:TESPyLogger:Network initialised.
INFO:TESPyLogger:Starting solver.
DEBUG:TESPyLogger:Number of connection equations: 0.
DEBUG:TESPyLogger:Number of bus equations: 0.
DEBUG:TESPyLogger:Number of component equations: 7.
DEBUG:TESPyLogger:Number of user defined equations: 0.
DEBUG:TESPyLogger:Total number of variables: 7.
DEBUG:TESPyLogger:Number of component variables: 0.
DEBUG:TESPyLogger:Number of connection variables: 7.
PROGRESS:TESPyLogger: iter  | residual   | progress   | massflow   | pressure   | enthalpy   | fluid      | component  
PROGRESS:TESPyLogger:-------+------------+------------+------------+------------+------------+------------+------------
PROGRESS:TESPyLogger: 1     | 8.11e+04   | 12 %       | 6.27e-02   | 1.17e+05   | 9.49e+02   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 2     | 5.95e+01   | 46 %       | 4.87e-04   | 0.00e+00   | 1.71e-10   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 3     | 3.64e-12   | 100 %      | 2.87e-16   | 0.00e+00   | 4.28e-12   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 4     | 3.64e-12   | 100 %      | 2.87e-16   | 0.00e+00   | 4.28e-12   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger:-------+------------+------------+------------+------------+------------+------------+------------
DEBUG:TESPyLogger:Total iterations: 4, Calculation time: 0.02 s, Iterations per second: 226.21
INFO:TESPyLogger:Postprocessing complete.
INFO:TESPyLogger:Calculation complete.
DEBUG:TESPyLogger:Solver properties:
 - mode: design
 - init_path: None
 - design_path: None
 - min_iter: 4
 - max_iter: 50
DEBUG:TESPyLogger:Network information:
 - Number of components: 5
 - Number of connections: 5
 - Number of busses: 0

 iter  | residual   | progress   | massflow   | pressure   | enthalpy   | fluid      | component  
-------+------------+------------+------------+------------+------------+------------+------------
 1     | 7.41e+04   | 12 %       | 6.40e-02   | 1.07e+05   | 9.86e+02   | 0.00e+00   | 0.00e+00   
 2     | 6.31e+01   | 46 %       | 5.13e-04   | 0.00e+00   | 3.42e-11   | 0.00e+00   | 0.00e+00   
 3     | 1.18e-10   | 100 %      | 4.66e-16   | 0.00e+00   | 2.14e-11   | 0.00e+00   | 0.00e+00   
 4     | 1.18e-10   | 100 %      | 4.66e-16   | 0.00e+00   | 2.14e-11   | 0.00e+00   | 0.00e+00   
Total iterations: 4, Calculation time: 0.02 s, Iterations per second: 162.75

 iter  | residual   | progress   | massflow   | pressure   | enthalpy   | fluid      | component  
-------+------------+------------+------------+------------+------------+------------+------------
 1     | 8.11e+04   | 12 %       | 6.27e-02   | 1.17e+05   | 9.49e+02   | 0.00e+00   | 0.00e+00   
 2     | 5.95e+01   | 46 %       | 4.87e-04   | 0.00e+00   | 1.71e-10   | 0.00e+00   | 0.00e+00   
 3     | 3.64e-12   | 100 %      | 2.87e-16   | 0.00e+00   | 4.28e-12   | 0.00e+00   | 0.00e+00   
 4     | 3.64e-12   | 100 %      | 2.87e-16   | 0.00e+00   | 4.28e-12   | 0.00e+00   | 0.00e+00   
Total iterations: 4, Calculation time: 0.02 s, Iterations per second: 226.21

DEBUG:TESPyLogger:Updated fluid property SI values and fluid mass fraction for user specified connection parameters.
DEBUG:TESPyLogger:The component compressor has 0 variables.
DEBUG:TESPyLogger:The component condenser has 0 variables.
DEBUG:TESPyLogger:The component cycle closer has 0 variables.
DEBUG:TESPyLogger:The component evaporator has 0 variables.
DEBUG:TESPyLogger:The component expansion valve has 0 variables.
DEBUG:TESPyLogger:Generic fluid property specification complete.
INFO:TESPyLogger:Network initialised.
INFO:TESPyLogger:Starting solver.
DEBUG:TESPyLogger:Number of connection equations: 0.
DEBUG:TESPyLogger:Number of bus equations: 0.
DEBUG:TESPyLogger:Number of component equations: 7.
DEBUG:TESPyLogger:Number of user defined equations: 0.
DEBUG:TESPyLogger:Total number of variables: 7.
DEBUG:TESPyLogger:Number of component variables: 0.
DEBUG:TESPyLogger:Number of connection variables: 7.
PROGRESS:TESPyLogger: iter  | residual   | progress   | massflow   | pressure   | enthalpy   | fluid      | component  
PROGRESS:TESPyLogger:-------+------------+------------+------------+------------+------------+------------+------------
PROGRESS:TESPyLogger: 1     | 8.85e+04   | 11 %       | 6.19e-02   | 1.28e+05   | 9.23e+02   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 2     | 5.71e+01   | 47 %       | 4.71e-04   | 0.00e+00   | 8.56e-12   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 3     | 1.17e-10   | 100 %      | 3.78e-16   | 0.00e+00   | 8.56e-12   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 4     | 1.17e-10   | 100 %      | 3.78e-16   | 0.00e+00   | 8.56e-12   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger:-------+------------+------------+------------+------------+------------+------------+------------
DEBUG:TESPyLogger:Total iterations: 4, Calculation time: 0.02 s, Iterations per second: 244.99
INFO:TESPyLogger:Postprocessing complete.
INFO:TESPyLogger:Calculation complete.
DEBUG:TESPyLogger:Solver properties:
 - mode: design
 - init_path: None
 - design_path: None
 - min_iter: 4
 - max_iter: 50
DEBUG:TESPyLogger:Network information:
 - Number of components: 5
 - Number of connections: 5
 - Number of busses: 0
DEBUG:TESPyLogger:Updated fluid property SI values and fluid mass fraction for user specified connection parameters.
DEBUG:TESPyLogger:The component compressor has 0 variables.
DEBUG:TESPyLogger:The component condenser has 0 variables.
DEBUG:TESPyLogger:The component cycle closer has 0 variables.
DEBUG:TESPyLogger:The component evaporator has 0 variables.
DEBUG:TESPyLogger:The component expansion valve has 0 variables.
DEBUG:TESPyLogger:Generic fluid property specification complete.
INFO:TESPyLogger:Network initialised.
INFO:TESPyLogger:Starting solver.
DEBUG:TESPyLogger:Number of connection equations: 0.
DEBUG:TESPyLogger:Number of bus equations: 0.
DEBUG:TESPyLogger:Number of component equations: 7.
DEBUG:TESPyLogger:Number of user defined equations: 0.
DEBUG:TESPyLogger:Total number of variables: 7.
DEBUG:TESPyLogger:Number of component variables: 0.
DEBUG:TESPyLogger:Number of connection variables: 7.
PROGRESS:TESPyLogger: iter  | residual   | progress   | massflow   | pressure   | enthalpy   | fluid      | component  
PROGRESS:TESPyLogger:-------+------------+------------+------------+------------+------------+------------+------------
PROGRESS:TESPyLogger: 1     | 9.64e+04   | 11 %       | 6.17e-02   | 1.39e+05   | 9.07e+02   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 2     | 5.60e+01   | 47 %       | 4.65e-04   | 1.68e-10   | 2.57e-11   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 3     | 2.34e-10   | 100 %      | 1.61e-16   | 0.00e+00   | 2.57e-11   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 4     | 2.34e-10   | 100 %      | 1.61e-16   | 0.00e+00   | 2.57e-11   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger:-------+------------+------------+------------+------------+------------+------------+------------
DEBUG:TESPyLogger:Total iterations: 4, Calculation time: 0.02 s, Iterations per second: 233.27
INFO:TESPyLogger:Postprocessing complete.
INFO:TESPyLogger:Calculation complete.
DEBUG:TESPyLogger:Solver properties:
 - mode: design
 - init_path: None
 - design_path: None
 - min_iter: 4
 - max_iter: 50
DEBUG:TESPyLogger:Network information:
 - Number of components: 5
 - Number of connections: 5
 - Number of busses: 0
DEBUG:TESPyLogger:Updated fluid property SI values and fluid mass fraction for user specified connection parameters.
DEBUG:TESPyLogger:The component compressor has 0 variables.
DEBUG:TESPyLogger:The component condenser has 0 variables.

 iter  | residual   | progress   | massflow   | pressure   | enthalpy   | fluid      | component  
-------+------------+------------+------------+------------+------------+------------+------------
 1     | 8.85e+04   | 11 %       | 6.19e-02   | 1.28e+05   | 9.23e+02   | 0.00e+00   | 0.00e+00   
 2     | 5.71e+01   | 47 %       | 4.71e-04   | 0.00e+00   | 8.56e-12   | 0.00e+00   | 0.00e+00   
 3     | 1.17e-10   | 100 %      | 3.78e-16   | 0.00e+00   | 8.56e-12   | 0.00e+00   | 0.00e+00   
 4     | 1.17e-10   | 100 %      | 3.78e-16   | 0.00e+00   | 8.56e-12   | 0.00e+00   | 0.00e+00   
Total iterations: 4, Calculation time: 0.02 s, Iterations per second: 244.99

 iter  | residual   | progress   | massflow   | pressure   | enthalpy   | fluid      | component  
-------+------------+------------+------------+------------+------------+------------+------------
 1     | 9.64e+04   | 11 %       | 6.17e-02   | 1.39e+05   | 9.07e+02   | 0.00e+00   | 0.00e+00   
 2     | 5.60e+01   | 47 %       | 4.65e-04   | 1.68e-10   | 2.57e-11   | 0.00e+00   | 0.00e+00   
 3     | 2.34e-10   | 100 %      | 1.61e-16   | 0.00e+00   | 2.57e-11   | 0.00e+00   | 0.00e+00   
 4     | 2.34e-10   | 100 %      | 1.61e-16   | 0.00e+00   | 2.57e-11   | 0.00e+00   | 0.00e+00   
Total iterations: 4, Calculation time: 0.02 s, Iterations per second: 233.27

DEBUG:TESPyLogger:The component cycle closer has 0 variables.
DEBUG:TESPyLogger:The component evaporator has 0 variables.
DEBUG:TESPyLogger:The component expansion valve has 0 variables.
DEBUG:TESPyLogger:Generic fluid property specification complete.
INFO:TESPyLogger:Network initialised.
INFO:TESPyLogger:Starting solver.
DEBUG:TESPyLogger:Number of connection equations: 0.
DEBUG:TESPyLogger:Number of bus equations: 0.
DEBUG:TESPyLogger:Number of component equations: 7.
DEBUG:TESPyLogger:Number of user defined equations: 0.
DEBUG:TESPyLogger:Total number of variables: 7.
DEBUG:TESPyLogger:Number of component variables: 0.
DEBUG:TESPyLogger:Number of connection variables: 7.
PROGRESS:TESPyLogger: iter  | residual   | progress   | massflow   | pressure   | enthalpy   | fluid      | component  
PROGRESS:TESPyLogger:-------+------------+------------+------------+------------+------------+------------+------------
PROGRESS:TESPyLogger: 1     | 1.05e+05   | 10 %       | 6.23e-02   | 1.51e+05   | 9.02e+02   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 2     | 5.62e+01   | 47 %       | 4.71e-04   | 1.68e-10   | 4.28e-12   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 3     | 3.64e-12   | 100 %      | 3.00e-16   | 0.00e+00   | 4.28e-12   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 4     | 3.64e-12   | 100 %      | 3.00e-16   | 0.00e+00   | 4.28e-12   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger:-------+------------+------------+------------+------------+------------+------------+------------
DEBUG:TESPyLogger:Total iterations: 4, Calculation time: 0.02 s, Iterations per second: 168.71
INFO:TESPyLogger:Postprocessing complete.
INFO:TESPyLogger:Calculation complete.
DEBUG:TESPyLogger:Solver properties:
 - mode: design
 - init_path: None
 - design_path: None
 - min_iter: 4
 - max_iter: 50
DEBUG:TESPyLogger:Network information:
 - Number of components: 5
 - Number of connections: 5
 - Number of busses: 0
DEBUG:TESPyLogger:Updated fluid property SI values and fluid mass fraction for user specified connection parameters.
DEBUG:TESPyLogger:The component compressor has 0 variables.
DEBUG:TESPyLogger:The component condenser has 0 variables.
DEBUG:TESPyLogger:The component cycle closer has 0 variables.
DEBUG:TESPyLogger:The component evaporator has 0 variables.
DEBUG:TESPyLogger:The component expansion valve has 0 variables.
DEBUG:TESPyLogger:Generic fluid property specification complete.
INFO:TESPyLogger:Network initialised.
INFO:TESPyLogger:Starting solver.
DEBUG:TESPyLogger:Number of connection equations: 0.
DEBUG:TESPyLogger:Number of bus equations: 0.
DEBUG:TESPyLogger:Number of component equations: 7.
DEBUG:TESPyLogger:Number of user defined equations: 0.
DEBUG:TESPyLogger:Total number of variables: 7.
DEBUG:TESPyLogger:Number of component variables: 0.
DEBUG:TESPyLogger:Number of connection variables: 7.
PROGRESS:TESPyLogger: iter  | residual   | progress   | massflow   | pressure   | enthalpy   | fluid      | component  
PROGRESS:TESPyLogger:-------+------------+------------+------------+------------+------------+------------+------------
PROGRESS:TESPyLogger: 1     | 1.09e+06   | 0 %        | 1.71e+00   | 1.16e+06   | 4.94e+04   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 2     | 5.99e+03   | 24 %       | 6.20e-02   | 4.75e-10   | 2.26e+03   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 3     | 1.40e+02   | 42 %       | 9.42e-04   | 2.38e-10   | 9.52e-11   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 4     | 2.61e-10   | 100 %      | 3.32e-16   | 2.38e-10   | 2.46e-11   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 5     | 2.61e-10   | 100 %      | 3.32e-16   | 2.38e-10   | 2.46e-11   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger:-------+------------+------------+------------+------------+------------+------------+------------
DEBUG:TESPyLogger:Total iterations: 5, Calculation time: 0.04 s, Iterations per second: 138.93

 iter  | residual   | progress   | massflow   | pressure   | enthalpy   | fluid      | component  
-------+------------+------------+------------+------------+------------+------------+------------
 1     | 1.05e+05   | 10 %       | 6.23e-02   | 1.51e+05   | 9.02e+02   | 0.00e+00   | 0.00e+00   
 2     | 5.62e+01   | 47 %       | 4.71e-04   | 1.68e-10   | 4.28e-12   | 0.00e+00   | 0.00e+00   
 3     | 3.64e-12   | 100 %      | 3.00e-16   | 0.00e+00   | 4.28e-12   | 0.00e+00   | 0.00e+00   
 4     | 3.64e-12   | 100 %      | 3.00e-16   | 0.00e+00   | 4.28e-12   | 0.00e+00   | 0.00e+00   
Total iterations: 4, Calculation time: 0.02 s, Iterations per second: 168.71

 iter  | residual   | progress   | massflow   | pressure   | enthalpy   | fluid      | component  
-------+------------+------------+------------+------------+------------+------------+------------
 1     | 1.09e+06   | 0 %        | 1.71e+00   | 1.16e+06   | 4.94e+04   | 0.00e+00   | 0.00e+00   
 2     | 5.99e+03   | 24 %       | 6.20e-02   | 4.75e-10   | 2.26e+03   | 0.00e+00   | 0.00e+00   
 3     | 1.40e+02   | 42 %       | 9.42e-04   | 2.38e-10   | 9.52e-11   | 0.00e+00   | 0.00e+00   
 4     | 2.61e-10   | 100 %      | 3.32e-16   | 2.38e-10   | 2.46e-11   | 0.00e+00   | 0.00e+00   
 5     | 2.61e-10   | 100 %      | 3.32e-16   | 2.38e-10   | 2.46e-11   | 0.00e+00   | 0.00e+00   
Total iterations: 5, Calculation time: 0.04 s, Iterations per second: 138.93

INFO:TESPyLogger:Postprocessing complete.
INFO:TESPyLogger:Calculation complete.
DEBUG:TESPyLogger:Solver properties:
 - mode: design
 - init_path: None
 - design_path: None
 - min_iter: 4
 - max_iter: 50
DEBUG:TESPyLogger:Network information:
 - Number of components: 5
 - Number of connections: 5
 - Number of busses: 0
DEBUG:TESPyLogger:Updated fluid property SI values and fluid mass fraction for user specified connection parameters.
DEBUG:TESPyLogger:The component compressor has 0 variables.
DEBUG:TESPyLogger:The component condenser has 0 variables.
DEBUG:TESPyLogger:The component cycle closer has 0 variables.
DEBUG:TESPyLogger:The component evaporator has 0 variables.
DEBUG:TESPyLogger:The component expansion valve has 0 variables.
DEBUG:TESPyLogger:Generic fluid property specification complete.
INFO:TESPyLogger:Network initialised.
INFO:TESPyLogger:Starting solver.
DEBUG:TESPyLogger:Number of connection equations: 0.
DEBUG:TESPyLogger:Number of bus equations: 0.
DEBUG:TESPyLogger:Number of component equations: 7.
DEBUG:TESPyLogger:Number of user defined equations: 0.
DEBUG:TESPyLogger:Total number of variables: 7.
DEBUG:TESPyLogger:Number of component variables: 0.
DEBUG:TESPyLogger:Number of connection variables: 7.
PROGRESS:TESPyLogger: iter  | residual   | progress   | massflow   | pressure   | enthalpy   | fluid      | component  
PROGRESS:TESPyLogger:-------+------------+------------+------------+------------+------------+------------+------------
PROGRESS:TESPyLogger: 1     | 1.71e+05   | 8 %        | 2.03e-01   | 1.68e+05   | 9.59e+03   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 2     | 4.77e+02   | 36 %       | 2.36e-03   | 2.38e-10   | 1.16e+02   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 3     | 2.75e-01   | 72 %       | 1.90e-06   | 2.38e-10   | 2.27e-11   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 4     | 2.61e-10   | 100 %      | 2.85e-16   | 2.38e-10   | 2.27e-11   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 5     | 2.61e-10   | 100 %      | 2.85e-16   | 2.38e-10   | 2.27e-11   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger:-------+------------+------------+------------+------------+------------+------------+------------
DEBUG:TESPyLogger:Total iterations: 5, Calculation time: 0.03 s, Iterations per second: 182.92
INFO:TESPyLogger:Postprocessing complete.
INFO:TESPyLogger:Calculation complete.
DEBUG:TESPyLogger:Solver properties:
 - mode: design
 - init_path: None
 - design_path: None
 - min_iter: 4
 - max_iter: 50
DEBUG:TESPyLogger:Network information:
 - Number of components: 5
 - Number of connections: 5
 - Number of busses: 0
DEBUG:TESPyLogger:Updated fluid property SI values and fluid mass fraction for user specified connection parameters.
DEBUG:TESPyLogger:The component compressor has 0 variables.
DEBUG:TESPyLogger:The component condenser has 0 variables.
DEBUG:TESPyLogger:The component cycle closer has 0 variables.
DEBUG:TESPyLogger:The component evaporator has 0 variables.
DEBUG:TESPyLogger:The component expansion valve has 0 variables.
DEBUG:TESPyLogger:Generic fluid property specification complete.
INFO:TESPyLogger:Network initialised.
INFO:TESPyLogger:Starting solver.
DEBUG:TESPyLogger:Number of connection equations: 0.
DEBUG:TESPyLogger:Number of bus equations: 0.
DEBUG:TESPyLogger:Number of component equations: 7.
DEBUG:TESPyLogger:Number of user defined equations: 0.
DEBUG:TESPyLogger:Total number of variables: 7.
DEBUG:TESPyLogger:Number of component variables: 0.
DEBUG:TESPyLogger:Number of connection variables: 7.
PROGRESS:TESPyLogger: iter  | residual   | progress   | massflow   | pressure   | enthalpy   | fluid      | component  
PROGRESS:TESPyLogger:-------+------------+------------+------------+------------+------------+------------+------------
PROGRESS:TESPyLogger: 1     | 1.83e+05   | 8 %        | 2.28e-01   | 1.81e+05   | 9.80e+03   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 2     | 5.16e+02   | 36 %       | 2.09e-03   | 2.38e-10   | 1.12e+02   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 3     | 2.34e-01   | 73 %       | 1.67e-06   | 2.38e-10   | 1.64e-12   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 4     | 2.60e-10   | 100 %      | 7.50e-16   | 2.38e-10   | 1.64e-12   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 5     | 2.33e-10   | 100 %      | 8.38e-17   | 2.38e-10   | 1.64e-12   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger:-------+------------+------------+------------+------------+------------+------------+------------
DEBUG:TESPyLogger:Total iterations: 5, Calculation time: 0.03 s, Iterations per second: 167.33

 iter  | residual   | progress   | massflow   | pressure   | enthalpy   | fluid      | component  
-------+------------+------------+------------+------------+------------+------------+------------
 1     | 1.71e+05   | 8 %        | 2.03e-01   | 1.68e+05   | 9.59e+03   | 0.00e+00   | 0.00e+00   
 2     | 4.77e+02   | 36 %       | 2.36e-03   | 2.38e-10   | 1.16e+02   | 0.00e+00   | 0.00e+00   
 3     | 2.75e-01   | 72 %       | 1.90e-06   | 2.38e-10   | 2.27e-11   | 0.00e+00   | 0.00e+00   
 4     | 2.61e-10   | 100 %      | 2.85e-16   | 2.38e-10   | 2.27e-11   | 0.00e+00   | 0.00e+00   
 5     | 2.61e-10   | 100 %      | 2.85e-16   | 2.38e-10   | 2.27e-11   | 0.00e+00   | 0.00e+00   
Total iterations: 5, Calculation time: 0.03 s, Iterations per second: 182.92

 iter  | residual   | progress   | massflow   | pressure   | enthalpy   | fluid      | component  
-------+------------+------------+------------+------------+------------+------------+------------
 1     | 1.83e+05   | 8 %        | 2.28e-01   | 1.81e+05   | 9.80e+03   | 0.00e+00   | 0.00e+00   
 2     | 5.16e+02   | 36 %       | 2.09e-03   | 2.38e-10   | 1.12e+02   | 0.00e+00   | 0.00e+00   
 3     | 2.34e-01   | 73 %       | 1.67e-06   | 2.38e-10   | 1.64e-12   | 0.00e+00   | 0.00e+00   
 4     | 2.60e-10   | 100 %      | 7.50e-16   | 2.38e-10   | 1.64e-12   | 0.00e+00   | 0.00e+00   
 5     | 2.33e-10   | 100 %      | 8.38e-17   | 2.38e-10   | 1.64e-12   | 0.00e+00   | 0.00e+00   
Total iterations: 5, Calculation time: 0.03 s, Iterations per second: 167.33

INFO:TESPyLogger:Postprocessing complete.
INFO:TESPyLogger:Calculation complete.
DEBUG:TESPyLogger:Solver properties:
 - mode: design
 - init_path: None
 - design_path: None
 - min_iter: 4
 - max_iter: 50
DEBUG:TESPyLogger:Network information:
 - Number of components: 5
 - Number of connections: 5
 - Number of busses: 0
DEBUG:TESPyLogger:Updated fluid property SI values and fluid mass fraction for user specified connection parameters.
DEBUG:TESPyLogger:The component compressor has 0 variables.
DEBUG:TESPyLogger:The component condenser has 0 variables.
DEBUG:TESPyLogger:The component cycle closer has 0 variables.
DEBUG:TESPyLogger:The component evaporator has 0 variables.
DEBUG:TESPyLogger:The component expansion valve has 0 variables.
DEBUG:TESPyLogger:Generic fluid property specification complete.
INFO:TESPyLogger:Network initialised.
INFO:TESPyLogger:Starting solver.
DEBUG:TESPyLogger:Number of connection equations: 0.
DEBUG:TESPyLogger:Number of bus equations: 0.
DEBUG:TESPyLogger:Number of component equations: 7.
DEBUG:TESPyLogger:Number of user defined equations: 0.
DEBUG:TESPyLogger:Total number of variables: 7.
DEBUG:TESPyLogger:Number of component variables: 0.
DEBUG:TESPyLogger:Number of connection variables: 7.
PROGRESS:TESPyLogger: iter  | residual   | progress   | massflow   | pressure   | enthalpy   | fluid      | component  
PROGRESS:TESPyLogger:-------+------------+------------+------------+------------+------------+------------+------------
PROGRESS:TESPyLogger: 1     | 1.96e+05   | 7 %        | 2.58e-01   | 1.93e+05   | 1.00e+04   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 2     | 5.63e+02   | 36 %       | 1.78e-03   | 0.00e+00   | 1.07e+02   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 3     | 1.91e-01   | 74 %       | 1.41e-06   | 0.00e+00   | 8.56e-12   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 4     | 7.28e-12   | 100 %      | 4.71e-16   | 0.00e+00   | 8.56e-12   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 5     | 1.17e-10   | 100 %      | 3.93e-16   | 0.00e+00   | 8.56e-12   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger:-------+------------+------------+------------+------------+------------+------------+------------
DEBUG:TESPyLogger:Total iterations: 5, Calculation time: 0.02 s, Iterations per second: 212.74
INFO:TESPyLogger:Postprocessing complete.
INFO:TESPyLogger:Calculation complete.
DEBUG:TESPyLogger:Solver properties:
 - mode: design
 - init_path: None
 - design_path: None
 - min_iter: 4
 - max_iter: 50
DEBUG:TESPyLogger:Network information:
 - Number of components: 5
 - Number of connections: 5
 - Number of busses: 0
DEBUG:TESPyLogger:Updated fluid property SI values and fluid mass fraction for user specified connection parameters.
DEBUG:TESPyLogger:The component compressor has 0 variables.
DEBUG:TESPyLogger:The component condenser has 0 variables.
DEBUG:TESPyLogger:The component cycle closer has 0 variables.
DEBUG:TESPyLogger:The component evaporator has 0 variables.
DEBUG:TESPyLogger:The component expansion valve has 0 variables.
DEBUG:TESPyLogger:Generic fluid property specification complete.
INFO:TESPyLogger:Network initialised.
INFO:TESPyLogger:Starting solver.
DEBUG:TESPyLogger:Number of connection equations: 0.
DEBUG:TESPyLogger:Number of bus equations: 0.
DEBUG:TESPyLogger:Number of component equations: 7.
DEBUG:TESPyLogger:Number of user defined equations: 0.
DEBUG:TESPyLogger:Total number of variables: 7.
DEBUG:TESPyLogger:Number of component variables: 0.
DEBUG:TESPyLogger:Number of connection variables: 7.
PROGRESS:TESPyLogger: iter  | residual   | progress   | massflow   | pressure   | enthalpy   | fluid      | component  
PROGRESS:TESPyLogger:-------+------------+------------+------------+------------+------------+------------+------------
PROGRESS:TESPyLogger: 1     | 2.10e+05   | 7 %        | 2.95e-01   | 2.07e+05   | 1.03e+04   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 2     | 6.21e+02   | 35 %       | 1.38e-03   | 0.00e+00   | 1.03e+02   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 3     | 1.42e-01   | 76 %       | 1.10e-06   | 0.00e+00   | 2.57e-11   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 4     | 2.34e-10   | 100 %      | 2.68e-16   | 0.00e+00   | 2.57e-11   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 5     | 2.34e-10   | 100 %      | 2.68e-16   | 0.00e+00   | 2.57e-11   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger:-------+------------+------------+------------+------------+------------+------------+------------
DEBUG:TESPyLogger:Total iterations: 5, Calculation time: 0.02 s, Iterations per second: 231.24
INFO:TESPyLogger:Postprocessing complete.
INFO:TESPyLogger:Calculation complete.
DEBUG:TESPyLogger:Solver properties:
 - mode: design
 - init_path: None
 - design_path: None
 - min_iter: 4
 - max_iter: 50
DEBUG:TESPyLogger:Network information:
 - Number of components: 5
 - Number of connections: 5
 - Number of busses: 0
DEBUG:TESPyLogger:Updated fluid property SI values and fluid mass fraction for user specified connection parameters.
DEBUG:TESPyLogger:The component compressor has 0 variables.
DEBUG:TESPyLogger:The component condenser has 0 variables.
DEBUG:TESPyLogger:The component cycle closer has 0 variables.

 iter  | residual   | progress   | massflow   | pressure   | enthalpy   | fluid      | component  
-------+------------+------------+------------+------------+------------+------------+------------
 1     | 1.96e+05   | 7 %        | 2.58e-01   | 1.93e+05   | 1.00e+04   | 0.00e+00   | 0.00e+00   
 2     | 5.63e+02   | 36 %       | 1.78e-03   | 0.00e+00   | 1.07e+02   | 0.00e+00   | 0.00e+00   
 3     | 1.91e-01   | 74 %       | 1.41e-06   | 0.00e+00   | 8.56e-12   | 0.00e+00   | 0.00e+00   
 4     | 7.28e-12   | 100 %      | 4.71e-16   | 0.00e+00   | 8.56e-12   | 0.00e+00   | 0.00e+00   
 5     | 1.17e-10   | 100 %      | 3.93e-16   | 0.00e+00   | 8.56e-12   | 0.00e+00   | 0.00e+00   
Total iterations: 5, Calculation time: 0.02 s, Iterations per second: 212.74

 iter  | residual   | progress   | massflow   | pressure   | enthalpy   | fluid      | component  
-------+------------+------------+------------+------------+------------+------------+------------
 1     | 2.10e+05   | 7 %        | 2.95e-01   | 2.07e+05   | 1.03e+04   | 0.00e+00   | 0.00e+00   
 2     | 6.21e+02   | 35 %       | 1.38e-03   | 0.00e+00   | 1.03e+02   | 0.00e+00   | 0.00e+00   
 3     | 1.42e-01   | 76 %       | 1.10e-06   | 0.00e+00   | 2.57e-11   | 0.00e+00   | 0.00e+00   
 4     | 2.34e-10   | 100 %      | 2.68e-16   | 0.00e+00   | 2.57e-11   | 0.00e+00   | 0.00e+00   
 5     | 2.34e-10   | 100 %      | 2.68e-16   | 0.00e+00   | 2.57e-11   | 0.00e+00   | 0.00e+00   
Total iterations: 5, Calculation time: 0.02 s, Iterations per second: 231.24

DEBUG:TESPyLogger:The component evaporator has 0 variables.
DEBUG:TESPyLogger:The component expansion valve has 0 variables.
DEBUG:TESPyLogger:Generic fluid property specification complete.
INFO:TESPyLogger:Network initialised.
INFO:TESPyLogger:Starting solver.
DEBUG:TESPyLogger:Number of connection equations: 0.
DEBUG:TESPyLogger:Number of bus equations: 0.
DEBUG:TESPyLogger:Number of component equations: 7.
DEBUG:TESPyLogger:Number of user defined equations: 0.
DEBUG:TESPyLogger:Total number of variables: 7.
DEBUG:TESPyLogger:Number of component variables: 0.
DEBUG:TESPyLogger:Number of connection variables: 7.
PROGRESS:TESPyLogger: iter  | residual   | progress   | massflow   | pressure   | enthalpy   | fluid      | component  
PROGRESS:TESPyLogger:-------+------------+------------+------------+------------+------------+------------+------------
PROGRESS:TESPyLogger: 1     | 2.25e+05   | 7 %        | 3.43e-01   | 2.21e+05   | 1.07e+04   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 2     | 6.96e+02   | 35 %       | 8.53e-04   | 4.75e-10   | 9.89e+01   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 3     | 8.44e-02   | 78 %       | 6.80e-07   | 0.00e+00   | 1.07e-10   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 4     | 7.28e-12   | 100 %      | 5.56e-16   | 0.00e+00   | 8.56e-12   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 5     | 7.28e-12   | 100 %      | 5.56e-16   | 0.00e+00   | 8.56e-12   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger:-------+------------+------------+------------+------------+------------+------------+------------
DEBUG:TESPyLogger:Total iterations: 5, Calculation time: 0.02 s, Iterations per second: 246.57
INFO:TESPyLogger:Postprocessing complete.
INFO:TESPyLogger:Calculation complete.
DEBUG:TESPyLogger:Solver properties:
 - mode: design
 - init_path: None
 - design_path: None
 - min_iter: 4
 - max_iter: 50
DEBUG:TESPyLogger:Network information:
 - Number of components: 5
 - Number of connections: 5
 - Number of busses: 0
DEBUG:TESPyLogger:Updated fluid property SI values and fluid mass fraction for user specified connection parameters.
DEBUG:TESPyLogger:The component compressor has 0 variables.
DEBUG:TESPyLogger:The component condenser has 0 variables.
DEBUG:TESPyLogger:The component cycle closer has 0 variables.
DEBUG:TESPyLogger:The component evaporator has 0 variables.
DEBUG:TESPyLogger:The component expansion valve has 0 variables.
DEBUG:TESPyLogger:Generic fluid property specification complete.
INFO:TESPyLogger:Network initialised.
INFO:TESPyLogger:Starting solver.
DEBUG:TESPyLogger:Number of connection equations: 0.
DEBUG:TESPyLogger:Number of bus equations: 0.
DEBUG:TESPyLogger:Number of component equations: 7.
DEBUG:TESPyLogger:Number of user defined equations: 0.
DEBUG:TESPyLogger:Total number of variables: 7.
DEBUG:TESPyLogger:Number of component variables: 0.
DEBUG:TESPyLogger:Number of connection variables: 7.
PROGRESS:TESPyLogger: iter  | residual   | progress   | massflow   | pressure   | enthalpy   | fluid      | component  
PROGRESS:TESPyLogger:-------+------------+------------+------------+------------+------------+------------+------------
PROGRESS:TESPyLogger: 1     | 2.41e+05   | 6 %        | 4.06e-01   | 2.37e+05   | 1.12e+04   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 2     | 7.95e+02   | 34 %       | 1.09e-04   | 0.00e+00   | 9.50e+01   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 3     | 1.03e-02   | 88 %       | 8.73e-08   | 0.00e+00   | 8.56e-12   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 4     | 1.17e-10   | 100 %      | 3.72e-16   | 0.00e+00   | 8.56e-12   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 5     | 1.17e-10   | 100 %      | 3.72e-16   | 0.00e+00   | 8.56e-12   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger:-------+------------+------------+------------+------------+------------+------------+------------
DEBUG:TESPyLogger:Total iterations: 5, Calculation time: 0.02 s, Iterations per second: 256.62
INFO:TESPyLogger:Postprocessing complete.
INFO:TESPyLogger:Calculation complete.
DEBUG:TESPyLogger:Solver properties:
 - mode: design
 - init_path: None
 - design_path: None
 - min_iter: 4
 - max_iter: 50
DEBUG:TESPyLogger:Network information:
 - Number of components: 5
 - Number of connections: 5
 - Number of busses: 0
DEBUG:TESPyLogger:Updated fluid property SI values and fluid mass fraction for user specified connection parameters.
DEBUG:TESPyLogger:The component compressor has 0 variables.
DEBUG:TESPyLogger:The component condenser has 0 variables.

 iter  | residual   | progress   | massflow   | pressure   | enthalpy   | fluid      | component  
-------+------------+------------+------------+------------+------------+------------+------------
 1     | 2.25e+05   | 7 %        | 3.43e-01   | 2.21e+05   | 1.07e+04   | 0.00e+00   | 0.00e+00   
 2     | 6.96e+02   | 35 %       | 8.53e-04   | 4.75e-10   | 9.89e+01   | 0.00e+00   | 0.00e+00   
 3     | 8.44e-02   | 78 %       | 6.80e-07   | 0.00e+00   | 1.07e-10   | 0.00e+00   | 0.00e+00   
 4     | 7.28e-12   | 100 %      | 5.56e-16   | 0.00e+00   | 8.56e-12   | 0.00e+00   | 0.00e+00   
 5     | 7.28e-12   | 100 %      | 5.56e-16   | 0.00e+00   | 8.56e-12   | 0.00e+00   | 0.00e+00   
Total iterations: 5, Calculation time: 0.02 s, Iterations per second: 246.57

 iter  | residual   | progress   | massflow   | pressure   | enthalpy   | fluid      | component  
-------+------------+------------+------------+------------+------------+------------+------------
 1     | 2.41e+05   | 6 %        | 4.06e-01   | 2.37e+05   | 1.12e+04   | 0.00e+00   | 0.00e+00   
 2     | 7.95e+02   | 34 %       | 1.09e-04   | 0.00e+00   | 9.50e+01   | 0.00e+00   | 0.00e+00   
 3     | 1.03e-02   | 88 %       | 8.73e-08   | 0.00e+00   | 8.56e-12   | 0.00e+00   | 0.00e+00   
 4     | 1.17e-10   | 100 %      | 3.72e-16   | 0.00e+00   | 8.56e-12   | 0.00e+00   | 0.00e+00   
 5     | 1.17e-10   | 100 %      | 3.72e-16   | 0.00e+00   | 8.56e-12   | 0.00e+00   | 0.00e+00   
Total iterations: 5, Calculation time: 0.02 s, Iterations per second: 256.62

DEBUG:TESPyLogger:The component cycle closer has 0 variables.
DEBUG:TESPyLogger:The component evaporator has 0 variables.
DEBUG:TESPyLogger:The component expansion valve has 0 variables.
DEBUG:TESPyLogger:Generic fluid property specification complete.
INFO:TESPyLogger:Network initialised.
INFO:TESPyLogger:Starting solver.
DEBUG:TESPyLogger:Number of connection equations: 0.
DEBUG:TESPyLogger:Number of bus equations: 0.
DEBUG:TESPyLogger:Number of component equations: 7.
DEBUG:TESPyLogger:Number of user defined equations: 0.
DEBUG:TESPyLogger:Total number of variables: 7.
DEBUG:TESPyLogger:Number of component variables: 0.
DEBUG:TESPyLogger:Number of connection variables: 7.
PROGRESS:TESPyLogger: iter  | residual   | progress   | massflow   | pressure   | enthalpy   | fluid      | component  
PROGRESS:TESPyLogger:-------+------------+------------+------------+------------+------------+------------+------------
PROGRESS:TESPyLogger: 1     | 2.58e+05   | 6 %        | 4.95e-01   | 2.53e+05   | 1.19e+04   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 2     | 9.37e+02   | 33 %       | 1.04e-03   | 4.75e-10   | 9.13e+01   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 3     | 9.45e-02   | 78 %       | 8.47e-07   | 0.00e+00   | 2.57e-11   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 4     | 3.50e-10   | 100 %      | 1.07e-15   | 0.00e+00   | 2.57e-11   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 5     | 1.18e-10   | 100 %      | 1.02e-15   | 0.00e+00   | 2.57e-11   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger:-------+------------+------------+------------+------------+------------+------------+------------
DEBUG:TESPyLogger:Total iterations: 5, Calculation time: 0.02 s, Iterations per second: 212.30
INFO:TESPyLogger:Postprocessing complete.
INFO:TESPyLogger:Calculation complete.
DEBUG:TESPyLogger:Solver properties:
 - mode: design
 - init_path: None
 - design_path: None
 - min_iter: 4
 - max_iter: 50
DEBUG:TESPyLogger:Network information:
 - Number of components: 5
 - Number of connections: 5
 - Number of busses: 0
DEBUG:TESPyLogger:Updated fluid property SI values and fluid mass fraction for user specified connection parameters.
DEBUG:TESPyLogger:The component compressor has 0 variables.
DEBUG:TESPyLogger:The component condenser has 0 variables.
DEBUG:TESPyLogger:The component cycle closer has 0 variables.
DEBUG:TESPyLogger:The component evaporator has 0 variables.
DEBUG:TESPyLogger:The component expansion valve has 0 variables.
DEBUG:TESPyLogger:Generic fluid property specification complete.
INFO:TESPyLogger:Network initialised.
INFO:TESPyLogger:Starting solver.
DEBUG:TESPyLogger:Number of connection equations: 0.
DEBUG:TESPyLogger:Number of bus equations: 0.
DEBUG:TESPyLogger:Number of component equations: 7.
DEBUG:TESPyLogger:Number of user defined equations: 0.
DEBUG:TESPyLogger:Total number of variables: 7.
DEBUG:TESPyLogger:Number of component variables: 0.
DEBUG:TESPyLogger:Number of connection variables: 7.
PROGRESS:TESPyLogger: iter  | residual   | progress   | massflow   | pressure   | enthalpy   | fluid      | component  
PROGRESS:TESPyLogger:-------+------------+------------+------------+------------+------------+------------+------------
PROGRESS:TESPyLogger: 1     | 2.78e+05   | 6 %        | 6.33e-01   | 2.71e+05   | 1.30e+04   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 2     | 1.16e+03   | 32 %       | 3.02e-03   | 4.75e-10   | 8.78e+01   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 3     | 2.65e-01   | 73 %       | 2.54e-06   | 0.00e+00   | 5.14e-11   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 4     | 1.17e-10   | 100 %      | 3.29e-16   | 0.00e+00   | 8.56e-12   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 5     | 1.17e-10   | 100 %      | 3.29e-16   | 0.00e+00   | 8.56e-12   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger:-------+------------+------------+------------+------------+------------+------------+------------
DEBUG:TESPyLogger:Total iterations: 5, Calculation time: 0.02 s, Iterations per second: 221.56
INFO:TESPyLogger:Postprocessing complete.
INFO:TESPyLogger:Calculation complete.
DEBUG:TESPyLogger:Solver properties:
 - mode: design
 - init_path: None
 - design_path: None
 - min_iter: 4
 - max_iter: 50
DEBUG:TESPyLogger:Network information:
 - Number of components: 5
 - Number of connections: 5
 - Number of busses: 0
DEBUG:TESPyLogger:Updated fluid property SI values and fluid mass fraction for user specified connection parameters.
DEBUG:TESPyLogger:The component compressor has 0 variables.

 iter  | residual   | progress   | massflow   | pressure   | enthalpy   | fluid      | component  
-------+------------+------------+------------+------------+------------+------------+------------
 1     | 2.58e+05   | 6 %        | 4.95e-01   | 2.53e+05   | 1.19e+04   | 0.00e+00   | 0.00e+00   
 2     | 9.37e+02   | 33 %       | 1.04e-03   | 4.75e-10   | 9.13e+01   | 0.00e+00   | 0.00e+00   
 3     | 9.45e-02   | 78 %       | 8.47e-07   | 0.00e+00   | 2.57e-11   | 0.00e+00   | 0.00e+00   
 4     | 3.50e-10   | 100 %      | 1.07e-15   | 0.00e+00   | 2.57e-11   | 0.00e+00   | 0.00e+00   
 5     | 1.18e-10   | 100 %      | 1.02e-15   | 0.00e+00   | 2.57e-11   | 0.00e+00   | 0.00e+00   
Total iterations: 5, Calculation time: 0.02 s, Iterations per second: 212.30

 iter  | residual   | progress   | massflow   | pressure   | enthalpy   | fluid      | component  
-------+------------+------------+------------+------------+------------+------------+------------
 1     | 2.78e+05   | 6 %        | 6.33e-01   | 2.71e+05   | 1.30e+04   | 0.00e+00   | 0.00e+00   
 2     | 1.16e+03   | 32 %       | 3.02e-03   | 4.75e-10   | 8.78e+01   | 0.00e+00   | 0.00e+00   
 3     | 2.65e-01   | 73 %       | 2.54e-06   | 0.00e+00   | 5.14e-11   | 0.00e+00   | 0.00e+00   
 4     | 1.17e-10   | 100 %      | 3.29e-16   | 0.00e+00   | 8.56e-12   | 0.00e+00   | 0.00e+00   
 5     | 1.17e-10   | 100 %      | 3.29e-16   | 0.00e+00   | 8.56e-12   | 0.00e+00   | 0.00e+00   
Total iterations: 5, Calculation time: 0.02 s, Iterations per second: 221.56

DEBUG:TESPyLogger:The component condenser has 0 variables.
DEBUG:TESPyLogger:The component cycle closer has 0 variables.
DEBUG:TESPyLogger:The component evaporator has 0 variables.
DEBUG:TESPyLogger:The component expansion valve has 0 variables.
DEBUG:TESPyLogger:Generic fluid property specification complete.
INFO:TESPyLogger:Network initialised.
INFO:TESPyLogger:Starting solver.
DEBUG:TESPyLogger:Number of connection equations: 0.
DEBUG:TESPyLogger:Number of bus equations: 0.
DEBUG:TESPyLogger:Number of component equations: 7.
DEBUG:TESPyLogger:Number of user defined equations: 0.
DEBUG:TESPyLogger:Total number of variables: 7.
DEBUG:TESPyLogger:Number of component variables: 0.
DEBUG:TESPyLogger:Number of connection variables: 7.
PROGRESS:TESPyLogger: iter  | residual   | progress   | massflow   | pressure   | enthalpy   | fluid      | component  
PROGRESS:TESPyLogger:-------+------------+------------+------------+------------+------------+------------+------------
PROGRESS:TESPyLogger: 1     | 3.03e+05   | 5 %        | 8.90e-01   | 2.91e+05   | 1.49e+04   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 2     | 1.58e+03   | 31 %       | 7.27e-03   | 4.75e-10   | 8.47e+01   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 3     | 6.16e-01   | 69 %       | 6.46e-06   | 0.00e+00   | 2.57e-11   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 4     | 2.34e-10   | 100 %      | 3.78e-16   | 0.00e+00   | 2.57e-11   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 5     | 2.34e-10   | 100 %      | 3.78e-16   | 0.00e+00   | 2.57e-11   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger:-------+------------+------------+------------+------------+------------+------------+------------
DEBUG:TESPyLogger:Total iterations: 5, Calculation time: 0.02 s, Iterations per second: 209.06
INFO:TESPyLogger:Postprocessing complete.
INFO:TESPyLogger:Calculation complete.
DEBUG:TESPyLogger:Solver properties:
 - mode: design
 - init_path: None
 - design_path: None
 - min_iter: 4
 - max_iter: 50
DEBUG:TESPyLogger:Network information:
 - Number of components: 5
 - Number of connections: 5
 - Number of busses: 0
DEBUG:TESPyLogger:Updated fluid property SI values and fluid mass fraction for user specified connection parameters.
DEBUG:TESPyLogger:The component compressor has 0 variables.
DEBUG:TESPyLogger:The component condenser has 0 variables.
DEBUG:TESPyLogger:The component cycle closer has 0 variables.
DEBUG:TESPyLogger:The component evaporator has 0 variables.
DEBUG:TESPyLogger:The component expansion valve has 0 variables.
DEBUG:TESPyLogger:Generic fluid property specification complete.
INFO:TESPyLogger:Network initialised.
INFO:TESPyLogger:Starting solver.
DEBUG:TESPyLogger:Number of connection equations: 0.
DEBUG:TESPyLogger:Number of bus equations: 0.
DEBUG:TESPyLogger:Number of component equations: 7.
DEBUG:TESPyLogger:Number of user defined equations: 0.
DEBUG:TESPyLogger:Total number of variables: 7.
DEBUG:TESPyLogger:Number of component variables: 0.
DEBUG:TESPyLogger:Number of connection variables: 7.
PROGRESS:TESPyLogger: iter  | residual   | progress   | massflow   | pressure   | enthalpy   | fluid      | component  
PROGRESS:TESPyLogger:-------+------------+------------+------------+------------+------------+------------+------------
PROGRESS:TESPyLogger: 1     | 3.51e+05   | 5 %        | 1.79e+00   | 3.17e+05   | 2.19e+04   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 2     | 3.15e+03   | 27 %       | 2.59e-02   | 5.04e-10   | 8.41e+01   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 3     | 2.18e+00   | 62 %       | 2.67e-05   | 0.00e+00   | 0.00e+00   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 4     | 0.00e+00   | 100 %      | 0.00e+00   | 0.00e+00   | 0.00e+00   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 5     | 0.00e+00   | 100 %      | 0.00e+00   | 0.00e+00   | 0.00e+00   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger:-------+------------+------------+------------+------------+------------+------------+------------
DEBUG:TESPyLogger:Total iterations: 5, Calculation time: 0.02 s, Iterations per second: 203.92
INFO:TESPyLogger:Postprocessing complete.
INFO:TESPyLogger:Calculation complete.
DEBUG:TESPyLogger:Solver properties:
 - mode: design
 - init_path: None
 - design_path: None
 - min_iter: 4
 - max_iter: 50
DEBUG:TESPyLogger:Network information:
 - Number of components: 5
 - Number of connections: 5
 - Number of busses: 0

 iter  | residual   | progress   | massflow   | pressure   | enthalpy   | fluid      | component  
-------+------------+------------+------------+------------+------------+------------+------------
 1     | 3.03e+05   | 5 %        | 8.90e-01   | 2.91e+05   | 1.49e+04   | 0.00e+00   | 0.00e+00   
 2     | 1.58e+03   | 31 %       | 7.27e-03   | 4.75e-10   | 8.47e+01   | 0.00e+00   | 0.00e+00   
 3     | 6.16e-01   | 69 %       | 6.46e-06   | 0.00e+00   | 2.57e-11   | 0.00e+00   | 0.00e+00   
 4     | 2.34e-10   | 100 %      | 3.78e-16   | 0.00e+00   | 2.57e-11   | 0.00e+00   | 0.00e+00   
 5     | 2.34e-10   | 100 %      | 3.78e-16   | 0.00e+00   | 2.57e-11   | 0.00e+00   | 0.00e+00   
Total iterations: 5, Calculation time: 0.02 s, Iterations per second: 209.06

 iter  | residual   | progress   | massflow   | pressure   | enthalpy   | fluid      | component  
-------+------------+------------+------------+------------+------------+------------+------------
 1     | 3.51e+05   | 5 %        | 1.79e+00   | 3.17e+05   | 2.19e+04   | 0.00e+00   | 0.00e+00   
 2     | 3.15e+03   | 27 %       | 2.59e-02   | 5.04e-10   | 8.41e+01   | 0.00e+00   | 0.00e+00   
 3     | 2.18e+00   | 62 %       | 2.67e-05   | 0.00e+00   | 0.00e+00   | 0.00e+00   | 0.00e+00   
 4     | 0.00e+00   | 100 %      | 0.00e+00   | 0.00e+00   | 0.00e+00   | 0.00e+00   | 0.00e+00   
 5     | 0.00e+00   | 100 %      | 0.00e+00   | 0.00e+00   | 0.00e+00   | 0.00e+00   | 0.00e+00   
Total iterations: 5, Calculation time: 0.02 s, Iterations per second: 203.92

DEBUG:TESPyLogger:Updated fluid property SI values and fluid mass fraction for user specified connection parameters.
DEBUG:TESPyLogger:The component compressor has 0 variables.
DEBUG:TESPyLogger:The component condenser has 0 variables.
DEBUG:TESPyLogger:The component cycle closer has 0 variables.
DEBUG:TESPyLogger:The component evaporator has 0 variables.
DEBUG:TESPyLogger:The component expansion valve has 0 variables.
DEBUG:TESPyLogger:Generic fluid property specification complete.
INFO:TESPyLogger:Network initialised.
INFO:TESPyLogger:Starting solver.
DEBUG:TESPyLogger:Number of connection equations: 0.
DEBUG:TESPyLogger:Number of bus equations: 0.
DEBUG:TESPyLogger:Number of component equations: 7.
DEBUG:TESPyLogger:Number of user defined equations: 0.
DEBUG:TESPyLogger:Total number of variables: 7.
DEBUG:TESPyLogger:Number of component variables: 0.
DEBUG:TESPyLogger:Number of connection variables: 7.
PROGRESS:TESPyLogger: iter  | residual   | progress   | massflow   | pressure   | enthalpy   | fluid      | component  
PROGRESS:TESPyLogger:-------+------------+------------+------------+------------+------------+------------+------------
PROGRESS:TESPyLogger: 1     | 1.48e+06   | 0 %        | 4.55e+00   | 1.37e+06   | 7.23e+04   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 2     | 8.10e+03   | 23 %       | 6.33e-02   | 4.75e-10   | 2.11e+03   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 3     | 1.34e+02   | 43 %       | 1.04e-03   | 0.00e+00   | 0.00e+00   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 4     | 0.00e+00   | 100 %      | 0.00e+00   | 0.00e+00   | 0.00e+00   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 5     | 0.00e+00   | 100 %      | 0.00e+00   | 0.00e+00   | 0.00e+00   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger:-------+------------+------------+------------+------------+------------+------------+------------
DEBUG:TESPyLogger:Total iterations: 5, Calculation time: 0.03 s, Iterations per second: 191.76
INFO:TESPyLogger:Postprocessing complete.
INFO:TESPyLogger:Calculation complete.
DEBUG:TESPyLogger:Solver properties:
 - mode: design
 - init_path: None
 - design_path: None
 - min_iter: 4
 - max_iter: 50
DEBUG:TESPyLogger:Network information:
 - Number of components: 5
 - Number of connections: 5
 - Number of busses: 0
DEBUG:TESPyLogger:Updated fluid property SI values and fluid mass fraction for user specified connection parameters.
DEBUG:TESPyLogger:The component compressor has 0 variables.
DEBUG:TESPyLogger:The component condenser has 0 variables.
DEBUG:TESPyLogger:The component cycle closer has 0 variables.
DEBUG:TESPyLogger:The component evaporator has 0 variables.
DEBUG:TESPyLogger:The component expansion valve has 0 variables.
DEBUG:TESPyLogger:Generic fluid property specification complete.
INFO:TESPyLogger:Network initialised.
INFO:TESPyLogger:Starting solver.
DEBUG:TESPyLogger:Number of connection equations: 0.
DEBUG:TESPyLogger:Number of bus equations: 0.
DEBUG:TESPyLogger:Number of component equations: 7.
DEBUG:TESPyLogger:Number of user defined equations: 0.
DEBUG:TESPyLogger:Total number of variables: 7.
DEBUG:TESPyLogger:Number of component variables: 0.
DEBUG:TESPyLogger:Number of connection variables: 7.
PROGRESS:TESPyLogger: iter  | residual   | progress   | massflow   | pressure   | enthalpy   | fluid      | component  
PROGRESS:TESPyLogger:-------+------------+------------+------------+------------+------------+------------+------------
PROGRESS:TESPyLogger: 1     | 8.33e+02   | 34 %       | 6.50e-02   | 2.77e-08   | 1.08e+03   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 2     | 7.03e+01   | 46 %       | 5.49e-04   | 0.00e+00   | 8.03e-11   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 3     | 1.17e-10   | 100 %      | 2.45e-16   | 0.00e+00   | 1.89e-11   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 4     | 1.17e-10   | 100 %      | 2.45e-16   | 0.00e+00   | 1.89e-11   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger:-------+------------+------------+------------+------------+------------+------------+------------
DEBUG:TESPyLogger:Total iterations: 4, Calculation time: 0.02 s, Iterations per second: 172.96

 iter  | residual   | progress   | massflow   | pressure   | enthalpy   | fluid      | component  
-------+------------+------------+------------+------------+------------+------------+------------
 1     | 1.48e+06   | 0 %        | 4.55e+00   | 1.37e+06   | 7.23e+04   | 0.00e+00   | 0.00e+00   
 2     | 8.10e+03   | 23 %       | 6.33e-02   | 4.75e-10   | 2.11e+03   | 0.00e+00   | 0.00e+00   
 3     | 1.34e+02   | 43 %       | 1.04e-03   | 0.00e+00   | 0.00e+00   | 0.00e+00   | 0.00e+00   
 4     | 0.00e+00   | 100 %      | 0.00e+00   | 0.00e+00   | 0.00e+00   | 0.00e+00   | 0.00e+00   
 5     | 0.00e+00   | 100 %      | 0.00e+00   | 0.00e+00   | 0.00e+00   | 0.00e+00   | 0.00e+00   
Total iterations: 5, Calculation time: 0.03 s, Iterations per second: 191.76

 iter  | residual   | progress   | massflow   | pressure   | enthalpy   | fluid      | component  
-------+------------+------------+------------+------------+------------+------------+------------
 1     | 8.33e+02   | 34 %       | 6.50e-02   | 2.77e-08   | 1.08e+03   | 0.00e+00   | 0.00e+00   
 2     | 7.03e+01   | 46 %       | 5.49e-04   | 0.00e+00   | 8.03e-11   | 0.00e+00   | 0.00e+00   
 3     | 1.17e-10   | 100 %      | 2.45e-16   | 0.00e+00   | 1.89e-11   | 0.00e+00   | 0.00e+00   
 4     | 1.17e-10   | 100 %      | 2.45e-16   | 0.00e+00   | 1.89e-11   | 0.00e+00   | 0.00e+00   
Total iterations: 4, Calculation time: 0.02 s, Iterations per second: 172.96

INFO:TESPyLogger:Postprocessing complete.
INFO:TESPyLogger:Calculation complete.
DEBUG:TESPyLogger:Solver properties:
 - mode: design
 - init_path: None
 - design_path: None
 - min_iter: 4
 - max_iter: 50
DEBUG:TESPyLogger:Network information:
 - Number of components: 5
 - Number of connections: 5
 - Number of busses: 0
DEBUG:TESPyLogger:Updated fluid property SI values and fluid mass fraction for user specified connection parameters.
DEBUG:TESPyLogger:The component compressor has 0 variables.
DEBUG:TESPyLogger:The component condenser has 0 variables.
DEBUG:TESPyLogger:The component cycle closer has 0 variables.
DEBUG:TESPyLogger:The component evaporator has 0 variables.
DEBUG:TESPyLogger:The component expansion valve has 0 variables.
DEBUG:TESPyLogger:Generic fluid property specification complete.
INFO:TESPyLogger:Network initialised.
INFO:TESPyLogger:Starting solver.
DEBUG:TESPyLogger:Number of connection equations: 0.
DEBUG:TESPyLogger:Number of bus equations: 0.
DEBUG:TESPyLogger:Number of component equations: 7.
DEBUG:TESPyLogger:Number of user defined equations: 0.
DEBUG:TESPyLogger:Total number of variables: 7.
DEBUG:TESPyLogger:Number of component variables: 0.
DEBUG:TESPyLogger:Number of connection variables: 7.
PROGRESS:TESPyLogger: iter  | residual   | progress   | massflow   | pressure   | enthalpy   | fluid      | component  
PROGRESS:TESPyLogger:-------+------------+------------+------------+------------+------------+------------+------------
PROGRESS:TESPyLogger: 1     | 8.11e+02   | 34 %       | 6.27e-02   | 2.33e-08   | 1.03e+03   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 2     | 6.44e+01   | 46 %       | 5.08e-04   | 0.00e+00   | 5.53e-11   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 3     | 1.16e-10   | 100 %      | 6.31e-16   | 0.00e+00   | 4.61e-12   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 4     | 3.64e-12   | 100 %      | 2.86e-16   | 0.00e+00   | 4.61e-12   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger:-------+------------+------------+------------+------------+------------+------------+------------
DEBUG:TESPyLogger:Total iterations: 4, Calculation time: 0.02 s, Iterations per second: 168.18
INFO:TESPyLogger:Postprocessing complete.
INFO:TESPyLogger:Calculation complete.
DEBUG:TESPyLogger:Solver properties:
 - mode: design
 - init_path: None
 - design_path: None
 - min_iter: 4
 - max_iter: 50
DEBUG:TESPyLogger:Network information:
 - Number of components: 5
 - Number of connections: 5
 - Number of busses: 0
DEBUG:TESPyLogger:Updated fluid property SI values and fluid mass fraction for user specified connection parameters.
DEBUG:TESPyLogger:The component compressor has 0 variables.
DEBUG:TESPyLogger:The component condenser has 0 variables.
DEBUG:TESPyLogger:The component cycle closer has 0 variables.
DEBUG:TESPyLogger:The component evaporator has 0 variables.
DEBUG:TESPyLogger:The component expansion valve has 0 variables.
DEBUG:TESPyLogger:Generic fluid property specification complete.
INFO:TESPyLogger:Network initialised.
INFO:TESPyLogger:Starting solver.
DEBUG:TESPyLogger:Number of connection equations: 0.
DEBUG:TESPyLogger:Number of bus equations: 0.
DEBUG:TESPyLogger:Number of component equations: 7.
DEBUG:TESPyLogger:Number of user defined equations: 0.
DEBUG:TESPyLogger:Total number of variables: 7.
DEBUG:TESPyLogger:Number of component variables: 0.
DEBUG:TESPyLogger:Number of connection variables: 7.
PROGRESS:TESPyLogger: iter  | residual   | progress   | massflow   | pressure   | enthalpy   | fluid      | component  
PROGRESS:TESPyLogger:-------+------------+------------+------------+------------+------------+------------+------------
PROGRESS:TESPyLogger: 1     | 7.90e+02   | 34 %       | 6.06e-02   | 2.10e-08   | 9.76e+02   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 2     | 5.91e+01   | 46 %       | 4.70e-04   | 0.00e+00   | 1.17e-10   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 3     | 0.00e+00   | 100 %      | 0.00e+00   | 0.00e+00   | 0.00e+00   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 4     | 0.00e+00   | 100 %      | 0.00e+00   | 0.00e+00   | 0.00e+00   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger:-------+------------+------------+------------+------------+------------+------------+------------
DEBUG:TESPyLogger:Total iterations: 4, Calculation time: 0.02 s, Iterations per second: 175.36

 iter  | residual   | progress   | massflow   | pressure   | enthalpy   | fluid      | component  
-------+------------+------------+------------+------------+------------+------------+------------
 1     | 8.11e+02   | 34 %       | 6.27e-02   | 2.33e-08   | 1.03e+03   | 0.00e+00   | 0.00e+00   
 2     | 6.44e+01   | 46 %       | 5.08e-04   | 0.00e+00   | 5.53e-11   | 0.00e+00   | 0.00e+00   
 3     | 1.16e-10   | 100 %      | 6.31e-16   | 0.00e+00   | 4.61e-12   | 0.00e+00   | 0.00e+00   
 4     | 3.64e-12   | 100 %      | 2.86e-16   | 0.00e+00   | 4.61e-12   | 0.00e+00   | 0.00e+00   
Total iterations: 4, Calculation time: 0.02 s, Iterations per second: 168.18

 iter  | residual   | progress   | massflow   | pressure   | enthalpy   | fluid      | component  
-------+------------+------------+------------+------------+------------+------------+------------
 1     | 7.90e+02   | 34 %       | 6.06e-02   | 2.10e-08   | 9.76e+02   | 0.00e+00   | 0.00e+00   
 2     | 5.91e+01   | 46 %       | 4.70e-04   | 0.00e+00   | 1.17e-10   | 0.00e+00   | 0.00e+00   
 3     | 0.00e+00   | 100 %      | 0.00e+00   | 0.00e+00   | 0.00e+00   | 0.00e+00   | 0.00e+00   
 4     | 0.00e+00   | 100 %      | 0.00e+00   | 0.00e+00   | 0.00e+00   | 0.00e+00   | 0.00e+00   
Total iterations: 4, Calculation time: 0.02 s, Iterations per second: 175.36

INFO:TESPyLogger:Postprocessing complete.
INFO:TESPyLogger:Calculation complete.
DEBUG:TESPyLogger:Solver properties:
 - mode: design
 - init_path: None
 - design_path: None
 - min_iter: 4
 - max_iter: 50
DEBUG:TESPyLogger:Network information:
 - Number of components: 5
 - Number of connections: 5
 - Number of busses: 0
DEBUG:TESPyLogger:Updated fluid property SI values and fluid mass fraction for user specified connection parameters.
DEBUG:TESPyLogger:The component compressor has 0 variables.
DEBUG:TESPyLogger:The component condenser has 0 variables.
DEBUG:TESPyLogger:The component cycle closer has 0 variables.
DEBUG:TESPyLogger:The component evaporator has 0 variables.
DEBUG:TESPyLogger:The component expansion valve has 0 variables.
DEBUG:TESPyLogger:Generic fluid property specification complete.
INFO:TESPyLogger:Network initialised.
INFO:TESPyLogger:Starting solver.
DEBUG:TESPyLogger:Number of connection equations: 0.
DEBUG:TESPyLogger:Number of bus equations: 0.
DEBUG:TESPyLogger:Number of component equations: 7.
DEBUG:TESPyLogger:Number of user defined equations: 0.
DEBUG:TESPyLogger:Total number of variables: 7.
DEBUG:TESPyLogger:Number of component variables: 0.
DEBUG:TESPyLogger:Number of connection variables: 7.
PROGRESS:TESPyLogger: iter  | residual   | progress   | massflow   | pressure   | enthalpy   | fluid      | component  
PROGRESS:TESPyLogger:-------+------------+------------+------------+------------+------------+------------+------------
PROGRESS:TESPyLogger: 1     | 7.71e+02   | 34 %       | 5.86e-02   | 4.19e-08   | 9.29e+02   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 2     | 5.44e+01   | 47 %       | 4.35e-04   | 4.75e-10   | 1.00e-10   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 3     | 3.40e-10   | 100 %      | 1.72e-14   | 0.00e+00   | 2.98e-10   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 4     | 1.17e-10   | 100 %      | 3.70e-16   | 0.00e+00   | 8.77e-12   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger:-------+------------+------------+------------+------------+------------+------------+------------
DEBUG:TESPyLogger:Total iterations: 4, Calculation time: 0.02 s, Iterations per second: 168.44
INFO:TESPyLogger:Postprocessing complete.
INFO:TESPyLogger:Calculation complete.
DEBUG:TESPyLogger:Solver properties:
 - mode: design
 - init_path: None
 - design_path: None
 - min_iter: 4
 - max_iter: 50
DEBUG:TESPyLogger:Network information:
 - Number of components: 5
 - Number of connections: 5
 - Number of busses: 0
DEBUG:TESPyLogger:Updated fluid property SI values and fluid mass fraction for user specified connection parameters.
DEBUG:TESPyLogger:The component compressor has 0 variables.
DEBUG:TESPyLogger:The component condenser has 0 variables.
DEBUG:TESPyLogger:The component cycle closer has 0 variables.
DEBUG:TESPyLogger:The component evaporator has 0 variables.
DEBUG:TESPyLogger:The component expansion valve has 0 variables.
DEBUG:TESPyLogger:Generic fluid property specification complete.
INFO:TESPyLogger:Network initialised.
INFO:TESPyLogger:Starting solver.
DEBUG:TESPyLogger:Number of connection equations: 0.
DEBUG:TESPyLogger:Number of bus equations: 0.
DEBUG:TESPyLogger:Number of component equations: 7.
DEBUG:TESPyLogger:Number of user defined equations: 0.
DEBUG:TESPyLogger:Total number of variables: 7.
DEBUG:TESPyLogger:Number of component variables: 0.
DEBUG:TESPyLogger:Number of connection variables: 7.
PROGRESS:TESPyLogger: iter  | residual   | progress   | massflow   | pressure   | enthalpy   | fluid      | component  
PROGRESS:TESPyLogger:-------+------------+------------+------------+------------+------------+------------+------------
PROGRESS:TESPyLogger: 1     | 7.52e+02   | 34 %       | 5.67e-02   | 2.95e-08   | 8.85e+02   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 2     | 5.02e+01   | 47 %       | 4.04e-04   | 1.68e-10   | 3.00e-11   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 3     | 3.50e-10   | 100 %      | 1.15e-15   | 0.00e+00   | 2.57e-11   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 4     | 1.18e-10   | 100 %      | 7.30e-16   | 0.00e+00   | 2.57e-11   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger:-------+------------+------------+------------+------------+------------+------------+------------
DEBUG:TESPyLogger:Total iterations: 4, Calculation time: 0.02 s, Iterations per second: 168.53

 iter  | residual   | progress   | massflow   | pressure   | enthalpy   | fluid      | component  
-------+------------+------------+------------+------------+------------+------------+------------
 1     | 7.71e+02   | 34 %       | 5.86e-02   | 4.19e-08   | 9.29e+02   | 0.00e+00   | 0.00e+00   
 2     | 5.44e+01   | 47 %       | 4.35e-04   | 4.75e-10   | 1.00e-10   | 0.00e+00   | 0.00e+00   
 3     | 3.40e-10   | 100 %      | 1.72e-14   | 0.00e+00   | 2.98e-10   | 0.00e+00   | 0.00e+00   
 4     | 1.17e-10   | 100 %      | 3.70e-16   | 0.00e+00   | 8.77e-12   | 0.00e+00   | 0.00e+00   
Total iterations: 4, Calculation time: 0.02 s, Iterations per second: 168.44

 iter  | residual   | progress   | massflow   | pressure   | enthalpy   | fluid      | component  
-------+------------+------------+------------+------------+------------+------------+------------
 1     | 7.52e+02   | 34 %       | 5.67e-02   | 2.95e-08   | 8.85e+02   | 0.00e+00   | 0.00e+00   
 2     | 5.02e+01   | 47 %       | 4.04e-04   | 1.68e-10   | 3.00e-11   | 0.00e+00   | 0.00e+00   
 3     | 3.50e-10   | 100 %      | 1.15e-15   | 0.00e+00   | 2.57e-11   | 0.00e+00   | 0.00e+00   
 4     | 1.18e-10   | 100 %      | 7.30e-16   | 0.00e+00   | 2.57e-11   | 0.00e+00   | 0.00e+00   
Total iterations: 4, Calculation time: 0.02 s, Iterations per second: 168.53

INFO:TESPyLogger:Postprocessing complete.
INFO:TESPyLogger:Calculation complete.
DEBUG:TESPyLogger:Solver properties:
 - mode: design
 - init_path: None
 - design_path: None
 - min_iter: 4
 - max_iter: 50
DEBUG:TESPyLogger:Network information:
 - Number of components: 5
 - Number of connections: 5
 - Number of busses: 0
DEBUG:TESPyLogger:Updated fluid property SI values and fluid mass fraction for user specified connection parameters.
DEBUG:TESPyLogger:The component compressor has 0 variables.
DEBUG:TESPyLogger:The component condenser has 0 variables.
DEBUG:TESPyLogger:The component cycle closer has 0 variables.
DEBUG:TESPyLogger:The component evaporator has 0 variables.
DEBUG:TESPyLogger:The component expansion valve has 0 variables.
DEBUG:TESPyLogger:Generic fluid property specification complete.
INFO:TESPyLogger:Network initialised.
INFO:TESPyLogger:Starting solver.
DEBUG:TESPyLogger:Number of connection equations: 0.
DEBUG:TESPyLogger:Number of bus equations: 0.
DEBUG:TESPyLogger:Number of component equations: 7.
DEBUG:TESPyLogger:Number of user defined equations: 0.
DEBUG:TESPyLogger:Total number of variables: 7.
DEBUG:TESPyLogger:Number of component variables: 0.
DEBUG:TESPyLogger:Number of connection variables: 7.
PROGRESS:TESPyLogger: iter  | residual   | progress   | massflow   | pressure   | enthalpy   | fluid      | component  
PROGRESS:TESPyLogger:-------+------------+------------+------------+------------+------------+------------+------------
PROGRESS:TESPyLogger: 1     | 7.35e+02   | 34 %       | 5.48e-02   | 2.97e-08   | 8.44e+02   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 2     | 4.63e+01   | 48 %       | 3.76e-04   | 0.00e+00   | 5.44e-11   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 3     | 3.64e-12   | 100 %      | 2.75e-16   | 0.00e+00   | 4.18e-12   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 4     | 3.64e-12   | 100 %      | 2.75e-16   | 0.00e+00   | 4.18e-12   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger:-------+------------+------------+------------+------------+------------+------------+------------
DEBUG:TESPyLogger:Total iterations: 4, Calculation time: 0.02 s, Iterations per second: 226.79
INFO:TESPyLogger:Postprocessing complete.
INFO:TESPyLogger:Calculation complete.
DEBUG:TESPyLogger:Solver properties:
 - mode: design
 - init_path: None
 - design_path: None
 - min_iter: 4
 - max_iter: 50
DEBUG:TESPyLogger:Network information:
 - Number of components: 5
 - Number of connections: 5
 - Number of busses: 0
DEBUG:TESPyLogger:Updated fluid property SI values and fluid mass fraction for user specified connection parameters.
DEBUG:TESPyLogger:The component compressor has 0 variables.
DEBUG:TESPyLogger:The component condenser has 0 variables.
DEBUG:TESPyLogger:The component cycle closer has 0 variables.
DEBUG:TESPyLogger:The component evaporator has 0 variables.
DEBUG:TESPyLogger:The component expansion valve has 0 variables.
DEBUG:TESPyLogger:Generic fluid property specification complete.
INFO:TESPyLogger:Network initialised.
INFO:TESPyLogger:Starting solver.
DEBUG:TESPyLogger:Number of connection equations: 0.
DEBUG:TESPyLogger:Number of bus equations: 0.
DEBUG:TESPyLogger:Number of component equations: 7.
DEBUG:TESPyLogger:Number of user defined equations: 0.
DEBUG:TESPyLogger:Total number of variables: 7.
DEBUG:TESPyLogger:Number of component variables: 0.
DEBUG:TESPyLogger:Number of connection variables: 7.
PROGRESS:TESPyLogger: iter  | residual   | progress   | massflow   | pressure   | enthalpy   | fluid      | component  
PROGRESS:TESPyLogger:-------+------------+------------+------------+------------+------------+------------+------------
PROGRESS:TESPyLogger: 1     | 7.18e+02   | 34 %       | 5.31e-02   | 2.63e-08   | 8.06e+02   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 2     | 4.28e+01   | 48 %       | 3.50e-04   | 0.00e+00   | 1.43e-10   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 3     | 2.34e-10   | 100 %      | 7.08e-18   | 0.00e+00   | 2.86e-11   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 4     | 2.34e-10   | 100 %      | 7.08e-18   | 0.00e+00   | 2.86e-11   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger:-------+------------+------------+------------+------------+------------+------------+------------
DEBUG:TESPyLogger:Total iterations: 4, Calculation time: 0.03 s, Iterations per second: 151.69

 iter  | residual   | progress   | massflow   | pressure   | enthalpy   | fluid      | component  
-------+------------+------------+------------+------------+------------+------------+------------
 1     | 7.35e+02   | 34 %       | 5.48e-02   | 2.97e-08   | 8.44e+02   | 0.00e+00   | 0.00e+00   
 2     | 4.63e+01   | 48 %       | 3.76e-04   | 0.00e+00   | 5.44e-11   | 0.00e+00   | 0.00e+00   
 3     | 3.64e-12   | 100 %      | 2.75e-16   | 0.00e+00   | 4.18e-12   | 0.00e+00   | 0.00e+00   
 4     | 3.64e-12   | 100 %      | 2.75e-16   | 0.00e+00   | 4.18e-12   | 0.00e+00   | 0.00e+00   
Total iterations: 4, Calculation time: 0.02 s, Iterations per second: 226.79

 iter  | residual   | progress   | massflow   | pressure   | enthalpy   | fluid      | component  
-------+------------+------------+------------+------------+------------+------------+------------
 1     | 7.18e+02   | 34 %       | 5.31e-02   | 2.63e-08   | 8.06e+02   | 0.00e+00   | 0.00e+00   
 2     | 4.28e+01   | 48 %       | 3.50e-04   | 0.00e+00   | 1.43e-10   | 0.00e+00   | 0.00e+00   
 3     | 2.34e-10   | 100 %      | 7.08e-18   | 0.00e+00   | 2.86e-11   | 0.00e+00   | 0.00e+00   
 4     | 2.34e-10   | 100 %      | 7.08e-18   | 0.00e+00   | 2.86e-11   | 0.00e+00   | 0.00e+00   
Total iterations: 4, Calculation time: 0.03 s, Iterations per second: 151.69

INFO:TESPyLogger:Postprocessing complete.
INFO:TESPyLogger:Calculation complete.
DEBUG:TESPyLogger:Solver properties:
 - mode: design
 - init_path: None
 - design_path: None
 - min_iter: 4
 - max_iter: 50
DEBUG:TESPyLogger:Network information:
 - Number of components: 5
 - Number of connections: 5
 - Number of busses: 0
DEBUG:TESPyLogger:Updated fluid property SI values and fluid mass fraction for user specified connection parameters.
DEBUG:TESPyLogger:The component compressor has 0 variables.
DEBUG:TESPyLogger:The component condenser has 0 variables.
DEBUG:TESPyLogger:The component cycle closer has 0 variables.
DEBUG:TESPyLogger:The component evaporator has 0 variables.
DEBUG:TESPyLogger:The component expansion valve has 0 variables.
DEBUG:TESPyLogger:Generic fluid property specification complete.
INFO:TESPyLogger:Network initialised.
INFO:TESPyLogger:Starting solver.
DEBUG:TESPyLogger:Number of connection equations: 0.
DEBUG:TESPyLogger:Number of bus equations: 0.
DEBUG:TESPyLogger:Number of component equations: 7.
DEBUG:TESPyLogger:Number of user defined equations: 0.
DEBUG:TESPyLogger:Total number of variables: 7.
DEBUG:TESPyLogger:Number of component variables: 0.
DEBUG:TESPyLogger:Number of connection variables: 7.
PROGRESS:TESPyLogger: iter  | residual   | progress   | massflow   | pressure   | enthalpy   | fluid      | component  
PROGRESS:TESPyLogger:-------+------------+------------+------------+------------+------------+------------+------------
PROGRESS:TESPyLogger: 1     | 7.02e+02   | 35 %       | 5.14e-02   | 1.68e-08   | 7.71e+02   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 2     | 3.97e+01   | 48 %       | 3.26e-04   | 0.00e+00   | 1.20e-11   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 3     | 1.17e-10   | 100 %      | 1.47e-16   | 0.00e+00   | 1.20e-11   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 4     | 1.17e-10   | 100 %      | 1.47e-16   | 0.00e+00   | 1.20e-11   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger:-------+------------+------------+------------+------------+------------+------------+------------
DEBUG:TESPyLogger:Total iterations: 4, Calculation time: 0.02 s, Iterations per second: 253.34
INFO:TESPyLogger:Postprocessing complete.
INFO:TESPyLogger:Calculation complete.
DEBUG:TESPyLogger:Solver properties:
 - mode: design
 - init_path: None
 - design_path: None
 - min_iter: 4
 - max_iter: 50
DEBUG:TESPyLogger:Network information:
 - Number of components: 5
 - Number of connections: 5
 - Number of busses: 0
DEBUG:TESPyLogger:Updated fluid property SI values and fluid mass fraction for user specified connection parameters.
DEBUG:TESPyLogger:The component compressor has 0 variables.
DEBUG:TESPyLogger:The component condenser has 0 variables.
DEBUG:TESPyLogger:The component cycle closer has 0 variables.
DEBUG:TESPyLogger:The component evaporator has 0 variables.
DEBUG:TESPyLogger:The component expansion valve has 0 variables.
DEBUG:TESPyLogger:Generic fluid property specification complete.
INFO:TESPyLogger:Network initialised.
INFO:TESPyLogger:Starting solver.
DEBUG:TESPyLogger:Number of connection equations: 0.
DEBUG:TESPyLogger:Number of bus equations: 0.
DEBUG:TESPyLogger:Number of component equations: 7.
DEBUG:TESPyLogger:Number of user defined equations: 0.
DEBUG:TESPyLogger:Total number of variables: 7.
DEBUG:TESPyLogger:Number of component variables: 0.
DEBUG:TESPyLogger:Number of connection variables: 7.
PROGRESS:TESPyLogger: iter  | residual   | progress   | massflow   | pressure   | enthalpy   | fluid      | component  
PROGRESS:TESPyLogger:-------+------------+------------+------------+------------+------------+------------+------------
PROGRESS:TESPyLogger: 1     | 6.86e+02   | 35 %       | 4.98e-02   | 9.91e-09   | 7.38e+02   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 2     | 3.68e+01   | 49 %       | 3.04e-04   | 0.00e+00   | 2.35e-11   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 3     | 2.34e-10   | 100 %      | 3.20e-16   | 0.00e+00   | 2.35e-11   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 4     | 2.34e-10   | 100 %      | 3.20e-16   | 0.00e+00   | 2.35e-11   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger:-------+------------+------------+------------+------------+------------+------------+------------
DEBUG:TESPyLogger:Total iterations: 4, Calculation time: 0.02 s, Iterations per second: 233.37

 iter  | residual   | progress   | massflow   | pressure   | enthalpy   | fluid      | component  
-------+------------+------------+------------+------------+------------+------------+------------
 1     | 7.02e+02   | 35 %       | 5.14e-02   | 1.68e-08   | 7.71e+02   | 0.00e+00   | 0.00e+00   
 2     | 3.97e+01   | 48 %       | 3.26e-04   | 0.00e+00   | 1.20e-11   | 0.00e+00   | 0.00e+00   
 3     | 1.17e-10   | 100 %      | 1.47e-16   | 0.00e+00   | 1.20e-11   | 0.00e+00   | 0.00e+00   
 4     | 1.17e-10   | 100 %      | 1.47e-16   | 0.00e+00   | 1.20e-11   | 0.00e+00   | 0.00e+00   
Total iterations: 4, Calculation time: 0.02 s, Iterations per second: 253.34

 iter  | residual   | progress   | massflow   | pressure   | enthalpy   | fluid      | component  
-------+------------+------------+------------+------------+------------+------------+------------
 1     | 6.86e+02   | 35 %       | 4.98e-02   | 9.91e-09   | 7.38e+02   | 0.00e+00   | 0.00e+00   
 2     | 3.68e+01   | 49 %       | 3.04e-04   | 0.00e+00   | 2.35e-11   | 0.00e+00   | 0.00e+00   
 3     | 2.34e-10   | 100 %      | 3.20e-16   | 0.00e+00   | 2.35e-11   | 0.00e+00   | 0.00e+00   
 4     | 2.34e-10   | 100 %      | 3.20e-16   | 0.00e+00   | 2.35e-11   | 0.00e+00   | 0.00e+00   
Total iterations: 4, Calculation time: 0.02 s, Iterations per second: 233.37

INFO:TESPyLogger:Postprocessing complete.
INFO:TESPyLogger:Calculation complete.
DEBUG:TESPyLogger:Solver properties:
 - mode: design
 - init_path: None
 - design_path: None
 - min_iter: 4
 - max_iter: 50
DEBUG:TESPyLogger:Network information:
 - Number of components: 5
 - Number of connections: 5
 - Number of busses: 0
DEBUG:TESPyLogger:Updated fluid property SI values and fluid mass fraction for user specified connection parameters.
DEBUG:TESPyLogger:The component compressor has 0 variables.
DEBUG:TESPyLogger:The component condenser has 0 variables.
DEBUG:TESPyLogger:The component cycle closer has 0 variables.
DEBUG:TESPyLogger:The component evaporator has 0 variables.
DEBUG:TESPyLogger:The component expansion valve has 0 variables.
DEBUG:TESPyLogger:Generic fluid property specification complete.
INFO:TESPyLogger:Network initialised.
INFO:TESPyLogger:Starting solver.
DEBUG:TESPyLogger:Number of connection equations: 0.
DEBUG:TESPyLogger:Number of bus equations: 0.
DEBUG:TESPyLogger:Number of component equations: 7.
DEBUG:TESPyLogger:Number of user defined equations: 0.
DEBUG:TESPyLogger:Total number of variables: 7.
DEBUG:TESPyLogger:Number of component variables: 0.
DEBUG:TESPyLogger:Number of connection variables: 7.
PROGRESS:TESPyLogger: iter  | residual   | progress   | massflow   | pressure   | enthalpy   | fluid      | component  
PROGRESS:TESPyLogger:-------+------------+------------+------------+------------+------------+------------+------------
PROGRESS:TESPyLogger: 1     | 6.71e+02   | 35 %       | 4.83e-02   | 3.85e-08   | 7.07e+02   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 2     | 3.42e+01   | 49 %       | 2.84e-04   | 0.00e+00   | 1.53e-11   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 3     | 1.17e-10   | 100 %      | 9.15e-17   | 0.00e+00   | 1.53e-11   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger: 4     | 1.17e-10   | 100 %      | 9.15e-17   | 0.00e+00   | 1.53e-11   | 0.00e+00   | 0.00e+00   
PROGRESS:TESPyLogger:-------+------------+------------+------------+------------+------------+------------+------------
DEBUG:TESPyLogger:Total iterations: 4, Calculation time: 0.02 s, Iterations per second: 188.14
INFO:TESPyLogger:Postprocessing complete.
INFO:TESPyLogger:Calculation complete.

 iter  | residual   | progress   | massflow   | pressure   | enthalpy   | fluid      | component  
-------+------------+------------+------------+------------+------------+------------+------------
 1     | 6.71e+02   | 35 %       | 4.83e-02   | 3.85e-08   | 7.07e+02   | 0.00e+00   | 0.00e+00   
 2     | 3.42e+01   | 49 %       | 2.84e-04   | 0.00e+00   | 1.53e-11   | 0.00e+00   | 0.00e+00   
 3     | 1.17e-10   | 100 %      | 9.15e-17   | 0.00e+00   | 1.53e-11   | 0.00e+00   | 0.00e+00   
 4     | 1.17e-10   | 100 %      | 9.15e-17   | 0.00e+00   | 1.53e-11   | 0.00e+00   | 0.00e+00   
Total iterations: 4, Calculation time: 0.02 s, Iterations per second: 188.14

 

Figura 2. Análisis paramétrico del COP de la bomba de calor

La figura muestra los resultados del análisis COP. El caso base se basa en una temperatura de evaporación de 20 °C, una temperatura de condensación de 80 °C y una eficiencia isentrópica del compresor del 85 %.